20 Most Recent NorStar Startalk Flash 2 Phone - Page 3 Questions & Answers

I am not aware that you can program thru a pc. It is quite easy thru set progamming.

Dan

To change the number of rings enter Feature 983, if your system has 2 digit intercom #s your password is 120000 if your system has 3 digit intercom #s your password is 1020000. once you have entered the password you will see 3 selections you can make .use the three soft keys under the display and select AA (auto Attendant).
The 3 soft key selections GRTG, TABLE, and LINES
Press the LINES soft key
Enter the line number on the line you want to change ringing on (probably Line 1) and press OK
Press the TABLE soft key then the RINGS soft key
Press the CHNG soft key and enter in the amount of rings you wantand press OK
Press the NEXT key to go to the next line
Repeat the procedure for the remaining lines
Press Rls when finished

sounds like your handsfree button is stuck down if its automatically going to speaker.

You must initialize the general delivery mailbox. Dial into mail box 100 and record a name.

Dan

Once in the AA menu of f983 there is a setting for day and night based on the time and day of the week.

To Access Your Mailbox from Outside of the Office:
1. Call the main office number or your DID (if applicable.
2. If the call is answered by a receptionist, have them transfer you to your voicemail box
3. If the call is answered by the company greeting, or your personal greeting, Enter: * *
4. At the prompt, enter your mailbox #(extension #. and password all together

Feature 983 log 1020000 press 1 password is 734678255

you'll need the programming template that goes over the phone keys if you're not familiar with programming...

feature **admin (use #s on dialpad)
type admin again
select #6 permissions
enter set (ext)# you want to forward
scroll down to "forward on busy" & select
you'll see "forward to" hit the "change" button
enter in the extension # you want it to go to when busy
then select to store

You dont have integration.
First this is at least 2 port voicemail so you should have at least two extensions and ports cross connected to startalk.
Once you verified your ports and extensions everything should work since you received system preprogrammed and none of the programming was lost.

the time and date are maintained on the phone system. Programming should be done from the M7310, M7324 or the T7316E set. Administration access code: Feature * * 2 3 6 4 6 which also is Feature * * A D M I N.
If asked for a password enter the same 2 3 6 4 6.

If that doesn't work you may have the newer Compact ICS or the Modular 0x32 control unit wish will be Feature * * 8 4 6 3 which is T I M E. Password is 2 2 7 4 2 which is B A S I C or A D M I N which is 2 3 6 4 6.
When in programming just press the next button(lower right arrow) until you see what you want to change. Then press show ( top right arrow) ,then change if you want to change it. If you pass it, just press back (lower left)
Example: To change the Time & Date Press next until you see Time & Date. Then show Then change Then change again, change it if you need to, Then next again until you see what you need to change. For example; only the hour needs to be changed for day light savings time. Just press next until you come to the Hour. Then Change it. Then press release RLs when your done.

Does feature 983 still show as an inactive feature? You need to reinitialize the feature codes if the system was reset.

Please post what is currently happening.

Seems to be a known issue. The normal way is to disconnect the main control box unit. There is a video in the link https://www.google.com/search?q=wo+lines+stuck+on+a+Norstar+phone ..

Check handset cords

Set System Time 1-Feature **TIME 2-Password: BASIC 3-Change time as prompted in the display

You are probably inadvertantly did a busy station signal to sta 24 and are still queued up to it. Call 24 AND have them ANSWER to clear it. You may have to do it multiple time as most systems will allow 8 stations in the queue

Does it light up? Does the speakerphone work? Have you swapped the cords and handsets?