Samsung HL-R6167W 61" HDTV - Answered Questions & Fixed issues

your problem is most likely not the Tv i bet you are using an air antenna arent you

you will need the digital PCB model: HLR6167WX/XAA model: HLR6167WX/XAA part# BP94-01858A http://www.moduslinkptstvboards.com/search.php?search_query=BP94-01858A&x=10&y=10 Model: HLR6167WAX/XAA part# BP94-02084A see following website: http://www.shopjimmy.com/samsung/hlr4667wx/xaa?cat=225&q=HLR4667WX%2FXAA&tv_models=Samsung+HLR4667WX%2FXAA

First thing always try new lamp this may use 1 of 2 lamps 1) BP96-00826A 2) BP96-01073A remove the original lamp & it should have a part# on it. also, outside the lamp door, Samsung posts a label with the correct lamp part number on it. You can find lamps at the following website: http://www.shopjimmy.com/catalogsearch/result/?q=BP96-00826A

Sounds like a damaged color wheel.

Try refreshing the display setting of your TV. It maybe just on the display setting.

loose connection in one of the video cable either wire itself is bad or just need to reconnect them ,try different cables.

Hello, I believe the Fan #1 on Samsungs is usually either the Fan that directly cools the lamp or the exhaust fan right next to it. But as a tech I would recommend that you carefully check all fans by taking the back cover off and finding the trip switch (it needs to be held down, usually blue that indicated the cover is on). when the tv is powered on and the screen comes on the fans should begin to work, you can visually inspect and replace then =) Hope this helps, let me know if you have any questions

Hello, How long Ago did you replace your lamp? If this is not a lamp issue, it can most likely be a fan or thermostat malfunction (easy to replace, but hard to diagnose) If your lamp is new I would check around for any fans not spinning correctly. If they all seem to be working I would proceed to replace the heat sensor/thermostat. Hope this helps!

power supply board is faulty need to check the power transistors and fuses u will need a tech to solve this

I would suggest looking over the power supply for bulging capacitors. Had the same issue and the power supply needed to be changed.

The Color Wheel (part# BP96-00674A) will run you just under $100 from www.samsungparts.com and they offer a variety of shipping methods which will increase your total amount spent. I just received mine today and I ordered it this past Sunday night. My HLR6167W started buzzing and gave me a black and white picture that morning and I was all over the internet investigating the symptom. I elected to go with the color wheel based on what I was seeing and all the different things I read up on. I plan on putting it in tonight and will let you know the difficulty surrounding its installation when I am done.

You would have to determine from the TV owner manual if it can be connected--some can and some cannot----the model listed here is old enough that if it does connect it may not look very good.

Have to start at the beginning---Lamp? Ballast? Color wheel?

the fan like or high pitched sound may be a color wheel--if you unplug the set and remove the lamp you can look at it--any pieces of the colored plastic wheel missing or broken?

This can be solved by going into settings and taking off a timer. or u can simply reset the tv to factory settings and go from there. If you have any other questions visit my 12 hour tech support website. http://dsc-danielsstarcompanys.blogspot.com/click support for help. Hope this works. good luck.

Replace the color wheel. You can get the color wheel from www.tvrepairworld.com

Hi David,Thank you for purchasing my service.May I know the status of the led light at the front panel (Timer, Lamp, stand by/temp), which of them is off, lit solid, and blinking? It may help to narrow down where the fault came from...Jdvillanueva

vertical lines and all over the place

See my tip at http://www.fixya.com/support/r7807925-ballast_diagnosis_replacement_in_lcd for help with this.

Thanks for using FixYa and for the great rating.

hardrocko

All LED blinking : Lamp may be defective. Replace the lamp.