Top 20 Samsung HL-R6167W 61" HDTV Questions & Answers

your problem is most likely not the Tv i bet you are using an air antenna arent you

Try refreshing the display setting of your TV. It maybe just on the display setting.

loose connection in one of the video cable either wire itself is bad or just need to reconnect them ,try different cables.

First thing always try new lamp this may use 1 of 2 lamps 1) BP96-00826A 2) BP96-01073A remove the original lamp & it should have a part# on it. also, outside the lamp door, Samsung posts a label with the correct lamp part number on it. You can find lamps at the following website: http://www.shopjimmy.com/catalogsearch/result/?q=BP96-00826A

Hello, I believe the Fan #1 on Samsungs is usually either the Fan that directly cools the lamp or the exhaust fan right next to it. But as a tech I would recommend that you carefully check all fans by taking the back cover off and finding the trip switch (it needs to be held down, usually blue that indicated the cover is on). when the tv is powered on and the screen comes on the fans should begin to work, you can visually inspect and replace then =) Hope this helps, let me know if you have any questions

Hello, How long Ago did you replace your lamp? If this is not a lamp issue, it can most likely be a fan or thermostat malfunction (easy to replace, but hard to diagnose) If your lamp is new I would check around for any fans not spinning correctly. If they all seem to be working I would proceed to replace the heat sensor/thermostat. Hope this helps!

power supply board is faulty need to check the power transistors and fuses u will need a tech to solve this

I would suggest looking over the power supply for bulging capacitors. Had the same issue and the power supply needed to be changed.

You would have to determine from the TV owner manual if it can be connected--some can and some cannot----the model listed here is old enough that if it does connect it may not look very good.

Have to start at the beginning---Lamp? Ballast? Color wheel?

the fan like or high pitched sound may be a color wheel--if you unplug the set and remove the lamp you can look at it--any pieces of the colored plastic wheel missing or broken?

you will need the digital PCB model: HLR6167WX/XAA model: HLR6167WX/XAA part# BP94-01858A http://www.moduslinkptstvboards.com/search.php?search_query=BP94-01858A&x=10&y=10 Model: HLR6167WAX/XAA part# BP94-02084A see following website: http://www.shopjimmy.com/samsung/hlr4667wx/xaa?cat=225&q=HLR4667WX%2FXAA&tv_models=Samsung+HLR4667WX%2FXAA

This can be solved by going into settings and taking off a timer. or u can simply reset the tv to factory settings and go from there. If you have any other questions visit my 12 hour tech support website. http://dsc-danielsstarcompanys.blogspot.com/click support for help. Hope this works. good luck.

Replace the color wheel. You can get the color wheel from www.tvrepairworld.com

Hi David,Thank you for purchasing my service.May I know the status of the led light at the front panel (Timer, Lamp, stand by/temp), which of them is off, lit solid, and blinking? It may help to narrow down where the fault came from...Jdvillanueva

if this "whirring" sound was making a vibration on the TV, there is a good chance that the one that needs to be replaced is the color wheel. When the color wheel fails it also triggers the signal for replacing the lamp. This is another common issue with Samsung DLP's.

In order to replace the wheel follow this picture guide:
http://www.fixyourdlp.com/guides/samsun ... 01579a.php

You can purchase the wheel for your TV here:
http://www.discount-merchant.com/Samsun ... 1&CartID=0

See my tip at http://www.fixya.com/support/r7807925-ballast_diagnosis_replacement_in_lcd for help with this.

Thanks for using FixYa and for the great rating.

hardrocko

Have you tried replacing the fans. It might be a thermal sensor tripping. Hope this helps.

All three LED lights flashes,u hear alot of clicking sounds too?Yes,ur tv the Ballast board is dead too.This Ballast board job is only to ignite the tv projection lamp only.Replace the Ballast board,should solve this problems.