20 Most Recent Shure PG58 Professional Microphone Questions & Answers

Use the Shure X2U XLR to USB adapter to connect the mic to your computer.

Contact Shure for repairs.

Try connecting it to a receiver. It if connects to the receiver and sounds good, then it is not bad.

Contact Shure to have it repaired.

Clean the switch with contact cleaner.Replace the switch with a new one.In that order.

Your circuit board could be bad, but i would pull out the circuit board and spray contact cleaner onto the button, let it dry a few minutes and connect the battery and press that button quiet a few times and see if that fixes the problem.

Contact Shure for repairs. www.shure.com/service

Pop off the switch. Peel off the oval label under the switch. Remove the two screws to get everything out.

It sounds like it needs to be sent to Shure for repairs.

Hi, please attempt to factory reset your microphone. Also, some companies only allow certain accessories like a battery to be provided by them or special partner companies. So, please verify with your manufacturer that duracell batteries are allowed to be used within their products. Thank you.

I used to send them to Shure for service or repair. https://www.google.com/search?q=DISMANTLE+SHURE+KSM8 ..

It sounds like system incompatibility and the fact you are using a fake copy of one of the best microphones that has set an industry standard. See if you can find someone with a real Sure, or comparable mic. Also check the wiring and shielding on the mic, and also on the on the socket of the Complete. Hum and Buzz is nearly always bad wiring. You could also post here in this forum.

Komplete Audio 6 Mk1 vs Mk2 ' NI Community Forum - Native ...

https://www.native-instruments.com > forum > threads Jul 3, 2021 - Hi all I have a Komplete Audio 6 Mk1 audio interface, and I'm considering either upgrading to Komplete Audio 6 Mk2 or Komplete Audio 2 Mk2. https://www.google.com/search?q=komplete+audio+6+mk1+hum+on+microphone ..