Top 20
Samsung LN-S4051D 40 in. LCD Television Questions & Answers
I have an Samsung LN-T4066F 40 in
most likely you need a new mainboard
it is the board that all the hdmi ports are on
pull it out and get the part number off the board and search google for a new part buy it and replace it
1/2/2018 3:03:03 AM •
Samsung...
•
214 views • 0 helpful votes
Samsung dvd-r150 cannot finalize disc error
I've had that happen I will try cleaning them and you can clean your dvds also sometimes that works but after a while you just have to replace your player I've done that a few times hope this helps Merry Christmas
12/10/2017 12:21:03 AM •
Samsung...
•
277 views • 0 helpful votes
CHANGING THE CAPACITORS DID NOT
Those blinks [flashes] are fault indication (Error Codes). From the number of blinks occur at one time switch ON, you can get an idea about the faulty circuit section inside it. This will make repair easy. These are called blinking codes. Make sure about the exact number of blinking of the standby/power LED, by switching On & OFF the set, for at least two times. Count it carefully. If you wish to get some details, check the site linked here. It has details about blinking codes, and fault locating procedure, to many popular brand TVs and other devices.
http://electro-medical.blogspot.com/
http://homenol.blogspot.com/
http://electronicshelponline.blogspot.com/
If blinks continue without any pause, the main board is faulty.
Search the site by type in the "
brand name" to your device,
[Exclude the model number] in the "
Search box at the top right of the display window of the Homepage" to get gathered related posts.
7/18/2017 7:21:03 AM •
Samsung...
•
96 views • 0 helpful votes
Samsung TV--fire hazard??
You have measures the cable coming in , go from the center conductor to the braided ground sheath, I really think the problem is with the cable not the TV.
5/4/2017 10:03:03 PM •
Samsung...
•
301 views • 0 helpful votes
Troubleshooing will not power on
Does, or did the TV make clicking noises like it wants to turn on, but can't quite make it? If so, your problem is probably caused by faulty underrated capacitors used by Samsung. It is a reasonably easy fix for someone with a soldering iron. I'm no electronics tech-head - but I found it easy to do. It took about an hour including dissassembly and reassembly. There are numerous you-tube videos on how to go about the repairs.
https://www.youtube.com/results?search_query=samsung+tv+capacitor+replacement
The parts only cost a couple of dollars at your local electronics shop. The videos will tell you what ratings of capacitors to get.
Cheers, Ross.
4/30/2014 6:55:16 PM •
Samsung...
•
77 views • 0 helpful votes
My toshiba tv will not turn on the on off indicator light just flashes on and off
These blinks [flashes] are fault indication (Error Codes). From the number of blinks occur at one time switch ON, you can get an idea about the faulty circuit stage inside it. This will make repair easy. These are called blinking codes. Make sure about the exact number of blinking of the standby/power led, by switching On & OFF the set, for at least two times. Count it carefully. If you wish to get some details, check the site linked here. It has details about blinking codes, and fault locating, to many popular brand TVs and other devices. Viewing it in "
Mosaic" will make surf easy.
http://electronicshelponline.blogspot.com/
Blinking codes details to many popular brand TVs are given. Surf the site with patience.
3/24/2014 6:51:40 AM •
Samsung...
•
166 views • 0 helpful votes
Tv will not turn on
Check and replace damaged component/s at it main power regulator [SMPS] section circuit. Contact any service technician. If you wish to get some details; check the site linked here. Viewing it in "
Mosaic" or "
Magazine" will make surf easy. Surf the site with patience. Pull up older posts.
http://electronicshelponline.blogspot.com/
It will be best to replace the power supply regulator board as card basis.
4/19/2014 5:01:11 AM •
Samsung...
•
35 views • 0 helpful votes
Ps43d 450a 2wxxu
A lot of flat panel tv's have crapo capacitors from China, and they interfere with 'ready' circuits. Replace main capacitors on ps area, TV should come on.
2/12/2014 10:02:02 AM •
Samsung...
•
86 views • 0 helpful votes
No power
Main pwb fault. Replace it as card basis. Contact the authorized service centre for Panasonic. If you wish to get some details; check the site linked here. Viewing it in "
Mosaic" will make surf easy. Surf the site with patience.
http://electronicshelponline.blogspot.com/ Pull up older posts there.
3/28/2014 11:44:40 PM •
Samsung...
•
30 views • 0 helpful votes
Ps43d450a2wxxu
Have someone check power supply capacitors, Flat panels tvs use cheap capacitors from china.
2/12/2014 10:04:47 AM •
Samsung...
•
63 views • 0 helpful votes
When power button is pressed light blinks on and
These blinks are called blinking codes, and are fault indications. Count the number of these blinks occur at one time switch ON. From this number, you can get an idea about the faulty circuit stage inside the TV. If you wish to get more details about these blinking codes, check this link. It has blinking code details to many brand TVs.
http://electronicshelponline.blogspot.com/
Pull up previous posts by its left sidebar, or type in the
brand name and model number to of your set, to its search box, and
press '
Enter' or view it in
Mosaic / Timeslide
option.
9/26/2013 3:21:55 PM •
Samsung...
•
166 views • 1 helpful votes
Not finding what you are looking for?