20 Most Recent Samsung Digimax S600 Digital Camera - Page 5 Questions & Answers

The easiest way to delete pictures on your memory card is to format and then that's it memory card is already clean........

plug in camera USB.. go to start control panel... locate the scanners and cameras icon ... click on it to open it look for camera.. investigate in the folders until you fond pictures

Yes, your camera contains self timer, Please follow the below link and see how to use it.

It is very easy to use, I have pasted manual link which will help you, you can directly search for timer and you will find it in a click.

http://dl.owneriq.net/b/bb9bc898-a52b-4264-ae0d-0b6c6799a99c.pdf

http://www.samsungcamera.com/customer/download/cus_down_main.asp?key=s860

Does your camera support SD HC? Anything above a 2gb SD card is concider a HC; so if your camera can't support HC format then you can not use that card.

Hi,
The problem is of zoom lens motor which operates lens cover along with zoom, and it needs replacement with new part, and camera will start working fine again.
Thanks for using fixya

Check your ISO and white balance settings. You could go into the setup menu and go to "reset". This would get your camera back to factory defaults.

There is an independent company in new york that specializes on small point& shoot digital cameras, : Camera Repair NYC

more than buying a rteplacement camera. Even a second hand one would be cheaper than repair

Problem could be a bad battery. The beeps you're hearing could be a signal that power is low or almost dead. Assuming that your charger and the power/outlet in your house is fine, you could take a chance by buying a generic battery on the web. E-bay.com is a great source and usually they are pretty cheap. Try going to E-bay and type in your brand and model along with the word battery. By the way, I do not endorse E-bay nor am I affiliated in any way with the site or any of it's vendors. I just know they have many items such as the one you might need.

Good luck!

I Can Fix it

Hi,
Remove the write protect lock off by taking the card out of the camera, face the card towards you, look for a small white tab on the left hand side of the card, to unlock it push the tab down, it will be at the side of the card like this .



Regards.

Hi..

To unlock your memory card you need to remove it first. Look at your memory card you can see them a small button square you need to slide it. After that insert it back to your camera, try to use what will happen.

Hope it may helpful for you!!

ICmanServer

Hi there

One possibility is that the memory is full from previous photos and it won't accept any new images until some space is freed-up. It should show how many images have been taken out of how many. If this is the case, please remove some images and try again.

If that doesn't help, does the camera attempt to focus at all when you press the button gently (but not all the way)? Do you get ANY indication or border or frame on the LCD screen (if any) that it at least sensed your press/touch?

Also, try connecting it to a power cord. Does it work then?

Another thing, if you enable the flash to definately flash when you take a picture, do that, and try taking a picture. Did the flash at least work? Did the picture also get taken?

These are just some suggestion I'd like you to try. Please do get back to me with all of the above. I really hope I can get it working for you again.

Best regards

nLinked

the camera was last on the batteries were either extremely low, or they died and lens could have been kinda off track a little when it happened so it got stuck that way….Put in new batteries and If you lay the camera flat facing up at you and you look down and lens looks a little crooked….Push it slightly in the direction it needs to go to get back on track and when you hear the pop noise it’s fixed. Then when you turn the camera on if it stays on attempt to zoom in and out and the lens will then get back on track…and then TUrn it off and the lens should go back in

Yes you can use the camera with the computer, some of the editing software which came with the camera may not work with vista however but that wont stop you from uploading and viewing the images and videos.

There is a clock icon to the right of the menu/ok button. Press this. Press the shutter button once. You have about 5 seconds to pose the picture.

Hey there- I took my camera into the repair shop, and literally all the problem that my camera was having was that some sand and fine silt had gotten stuck in the part that moves in and out (pardon the lack of technical term here). So, after giving it a good cleaning, it works like a charm. Perhaps that will help, if you've taken the camera on vacation or use it outdoors a lot. Good Luck!

We can repair it if needed or you may contact Samsung direct, they are in Secaucus, NJ
samsungusa.com
or samsungcamera.com

http://www.driversdown.com/drivers/15716.shtml

Drivers for: Windows 98SE/ME/2000/XP