20 Most Recent
Siemens SpeedStream Modem (4100) (SS4100) - Page 2 Questions & Answers
I need a password
You may have to reset the modem. Hopefully you have all the details on hand for your broadband account available? That way once the details are in you can set the administrative password to whatever you wish. But write it down & put it somewhere safe. :)
8/11/2014 10:07:46 AM •
Siemens...
•
Answered
on Aug 11, 2014
I just took my computer
try to surf in safe-mode with networking. when it works, something block you..may be the antivirus have a security firewall or not correctly configured.
6/21/2014 2:29:42 PM •
Siemens...
•
Answered
on Jun 21, 2014
I was using my siemens gigaset se568 in dubai and
1. Connect your modem with bsnl line.2. Connect modem to your computer/laptop using LAN wire3. Power ON your modem4. Open Internet explorer5. Type 192.168.254.254 in address bar and click on enter button6. enter user name as admin and password also as admin. If it not accepts, then reset your router by pressing reset button available in the bottom in hole. Press for 30 seconds7. after log-in click on ISP Connections.8. Click on advanced settings9. Click on Configure the ATM Virtual Circuit10. Delete the existing entries11. Click on Add a new VC12. Enter VPI=0 to VCI=3513. Select protocol as PPPoE14. Select the PPPoE Configuration as 'with PPPoE Bridge'15. Click next button utill page comes for user name password, enter your login details16. Click on Finish button17. Reboot router.That's it, You are done
7/31/2013 5:20:55 AM •
Siemens...
•
Answered
on Jul 31, 2013
Siemens Speedstream 4100 Modem manual installion
Hi,
* You dont need any special drivers to install modem.
* Open up internet explorer, type 192.168.0.1 in the address bar and press enter key.
* Now you should see the configuration page of modem.
* On the left side, click on Advanced button, below that, you will see "connection configuration" option - click on it.
*** If it asks for modem access code anywhere, you can find the code underneath the modem. please type it ***
* Under this page, you have to enter the email address in username field and password, change the connection type to smart keep alive, click on save changes
* Now it may ask you for restart modem. click on restart. within 1 min, you will be connected to internet.
Take care
3/20/2013 6:46:08 PM •
Siemens...
•
Answered
on Mar 20, 2013
Not finding what you are looking for?