Top 20
Westell Versalink 327w Wireless Modem Router Dsl Rev C Questions & Answers
Change Password
you will have to reset it. there is a small inverted reset button, hold it in for 30 seconds and it will reset to factory default. There will be a factory default user and password you will need to use at that point.
10/9/2012 7:41:05 PM •
Westell...
•
491 views • 0 helpful votes
Changeing Password on Router
First, you'll need to reset the router, this is typically done via a tiny reset button located on the back of the router (you'll need a paper clip to press it). After that, changing the password requires you to know how to access the router options. This is different from brand to brand, but typically by simply going onto Google and searching for your modem's address (might be an IP address or actual address, like linksusrouter). Then just go into the settings, find the "change password option" and viola.
10/9/2012 7:42:56 PM •
Westell...
•
240 views • 0 helpful votes
Ap 5131 default password
Contact your ISP, they would be able to get that information for you, and it is not likely that anyone else would be able to get that for you.
3/29/2014 11:20:32 AM •
Westell...
•
536 views • 0 helpful votes
Onity machine error showing no valid data connect to pc , what can i do for that ...
Here are some steps you can take to troubleshoot and resolve the issue:
Connect the Machine to Your Computer:
First, ensure that your Onity key machine is properly connected to your computer. You can use either a USB or Ethernet connection, depending on your machine's configuration.
Be cautious not to damage any of the connections while setting up.
Launch the Access Control Software:
Once the machine is connected, launch the access control software provided by Onity.
Double-check that all the information (such as username and password) is correctly entered.
Select the "Reset" Option:
From the software's main menu, choose the "Reset" option.
You'll be prompted to enter an authorized user ID and password assigned to the machine's operator account.
After verifying these credentials, you can enter the reset mode.
Input New Credentials:
While in the reset mode, input new credentials for the machine.
Set a unique password and click "OK".
Remember this password, as you'll need it each time you use the key cutting device.
Confirm the Reset:
Confirm the reset by clicking "Yes" on the confirmation prompt.
Wait until the process completes successfully.
The machine will reboot automatically after a few seconds.
If you encounter any issues during this process, consider reaching out to Onity Tech Support for further assistance.
I can't leave a comment after logging in..
Anywhere in particular? You seem to managing just fine here!
https://www.fixya.com/users/atos-maximus
For some strange reason you are answering Solved questions from August 2012??
..
Not finding what you are looking for?