Top 20 iLO DVDR05 DVD Recorder Questions & Answers

Is this a pass code that someone else has set?If so,the only way is a lucky guess,ha,i did it that way one time.if you set it,it should be easy to reset,just go to change passcode.when I have login,i can use password or pass pin.is this the kind of passcode your talking about?or on a debit card?there is a # you can call to change it.

1: Get a movie and some popcorn. 2: Make sure the DVD player and the tv are turned on. 3: Push the button on either the front of the player or on the remote to open the player door to load the disc. 4. Put the disc on the tray that pops out 5. Push the same button pushed previously to close the door 6. Enjoy the movie

You may have to connect to a different output until you can change the settings back.

You need to rip and convert DVD to regular video and then uploading video to YouTube will be easy. Just follow below guide to do that. Leawo DVD Ripper is a DVD converter that can meet both demands. The Ripper have two versions available for grabbing, Windows and Mac version. You can free download and install the Ripper to begin PAL DVD to MP4/AVI/MOV video file ripping process by following the step by step below. Step 1. Kick off Leawo DVD Ripper, insert source PAL DVD disc into the DVD drive and click "Add Blu-ray/DVD" button to load source PAL DVD. Step 2.Click the drop-down list to change the output video format. If you would like to choose MP4 as the output video format, choose MP4 in the pop-up Profile panel (you can also choose other formats like AVI or MOV). Step 3.This step is optional. You can edit the output video and audio settings in details, such as video and audio codec, Bit Rate, Resolution, Frame Rate, Sample Rate, Aspect Ratio and Channel. If you are not sure of what to set, you can skip the step or just leave those parameters at default. Step 4.Finally, click the green "Convert" button to select destination folder to save the converted video, then click the other "Convert" button to begin the conversion process. You can view or pause the conversion process on the main interface. For more details, check: How to Rip PAL DVD to MP4/AVI/MOV video file

If you still need an AC power cable email [email protected]

Go to the store you bought it from and tell them your problem.

Is it that you want to record more data on them? If so, fill up the remaining available space, then finalize. That will be your only solution to this problem.

Hi,
Plz try this link ..hope it works:

http://www.google.co.in/#sclient=psy&hl=en&source=hp&q=manual+for+DVD05&psj=1&oq=manual+for+DVD05&aq=f&aqi=&aql=&gs_sm=e&gs_upl=5944l6693l0l8284l1l1l0l0l0l0l530l530l5-1l1l0&bav=on.2,or.r_gc.r_pw.&fp=fb14f34d6fd262fe&biw=1366&bih=566

Thanx

When this happens to me I just keep trying, and after 4 or 5 times it works.

If you still need an AC power cord, contact [email protected].

Dear swhracarrie:

http://www.ehow.com/how_4781044_hook-up-dvd-recorder-tv.html
This might help

There is no number its a walmart house name so all products under ILO are made by different manufacturing companies.

http://en.wikipedia.org/wiki/ILo_Technologies

go and buy u a universal remote or google the dvd player brand that u have and see if u can buy an original

Hello,

from my experience, I think your player is having a power problem. It must have received excess voltage/irregular power supply which has damaged an IC or capacitor on the power board of the player.

Sometimes this excess power supply might damage the player's main board. This is why it is advice able that you use step down for your player, because DVD player don't need excess power as something might be damaged.

To solve this problem, you will be needing a meter. Open the player, use the meter to read the components on the power board as it will help you discover the component that got damaged and you can then replace the bad component.

But if you do not have the knowledge of fixing this problem, you might be needing the help of a service technician.

Good

Try this website. It is free. www.doocu.com Thanks for choosing FixYa.

Lazer Tracking may have something stuck in the gear

Check on the Front Panel of your VCR look for Setup..see if have internal volume on your unit Like Pre Record Volume ...Good Luck

You either have a belt or gear slipping, a bad motor, or a disk that is stuck. You can take the cover off and make sure a disc isn't jamed and inspect that the motor is trying to turn. I know that most recorders won't let you open the tray when it is recording. It's a long shot, but you can also try unplugging the power chord and plug back in and see if that will reset it. Does try to open at all? does it make a sound like it's going to open?

Sounds like a hardware problem.
This is typical when one one of the DVD mechanism (motor fails, laser can't track, etc).

Although you can try some sort of DVD cleaning disk, or better yet
if mechanically inclined you can open it up and clean the DVD head and motor mechanisms manually.
Search here, or on the web on the steps to open up and clean them.

If it's still under warranty, call manufacture technical or customer support for a possible replacement.

Try this. You will need 2 RF cables and a RCA cable that has a red, black, and yellow plug on each end.

1. Plug the antenna signal into the converter box.
2. Connect the RF output (TV out) of the converter box to the RF input on the VCR
   
3. Connect the RF output (TV out) on the VCR to the TV
   
4. Finally, plug the DVD recorder into the converter box also, but use the 3 RCA cables that came with it (audio left, right and video).