Southwestern Bell FT372 Corded Phone - Answered Questions & Fixed issues

Hello.

Press MESSAGE and look at the display. It will tell you who the message is from and one of the soft keys will be ERASE or DELETE

Or, just scroll through the calls received, or erase all the calls.

Hope this helps.

Unplug all phone equipment and plug in one unpowered phone if you get DT the problem is the phone If not the problem is the line. If the problem is the line you will need to call the phone company to repair it. The phone company will charge to repair the line if it is bad in the house.

You dont activate caller id,when you get a call it shows the caller info,if it doesnt,check with your phone company to make sure you have caller id service.
I have the manual you need.

A new battery wont fix it,try unplugging the power supply,replace battery,plug the power supply back in then try storing your numbers.

Just scroll through the calls received,or erase all calls.

The date and time are set when you receive the first call after plugging in your phone.I have the owners manual if you need more help.

The manuals are readily available at

http://www.swbfreedomphone.com/ib/ib_frame.html

Free downloads for bell products.

want to program the short cut keys. can anyone please help me out

Call them http://www.manualslib.com/manual/652880/Southwestern-Bell-Fa970.html Possibly that manual will work

if you have headphone jack use remote speaker or if not carefully remove srews snip wires going to speaker, go to radio shack or ebay search for any radar detector because speakers are same hook speaker up to wires and that should fix your problem

You asked for the manual I got one and gone through it.
Here's what it says about auto answer

Automatic answer

Setting up auto answer

· Press the Messages button.

· The voice will ask you for a password. The default password is 1234.

· Follow the voice instructions from there.

Accessing voice mail from your own phone

· You will know you have voice mail when you see a flashing envelope next to your extension number and when you see the red light on your handset.

· Press the Messages button and listen for the voice instructions.

· Enter your password.

· Follow the voice instructions from there - Pressing 1 allows you to repeat messages, 2 allows you to save messages, and 3 allows you to delete messages.

Accessing voice mail from another phone on campus

· Dial your 4 digit office extension number or the voice mail extension number 1001.

· Press the * key during your greeting.

· The voice will ask you to enter your ID number - Enter you 4 digit extension number again and press #.

· The voice will then ask you to enter your password - Enter your voicemail password that you previously set up.

Accessing voice mail from off campus

· Dial your office number directly, including the area code OR dial the main number 724-503-1001.

· Press the * key during your greeting.

· The voice will ask you to enter your ID number - Enter your 4 digit extension and press #.

· The voice will then ask you to enter your password - Enter the voicemail password that you previously set up.
Follow the voice instructions from there
In case you need further assistance kindly let me know.
A Sergeant of you know, from your own department.

Hi,
This is because the speaker on your phone is damaged.You can try taking it to service centre they may just replace the speaker alone.If that is not possible no other go you need to go for a new phone only.
Thank You

I went to the southwesten bell freedom phone site on the web. Found answering machines.  My old machine was not listed, so I found instructions for a later machine.
The method for setting time was similar.  I tried it and it worked fine.
Your high prices prompted me to be less lazy.

I needed a manual also, and TF0903 is on the back of the phone. But then I found FM2575 on a sticker on the front of the phone, which does have a manual at http://www.swbfreedomphone.com/ib/ibcid/fm2575.pdf, which seems to match my phone exactly.

It must get the date and time from Caller ID when it gets a call. When I first set mine up, the date was 01/01 and time 12:00. Now after receiving three calls, the date and time are correct.

There are a few possibilities that could be the cause. The fact that its only one unit malfunctioning most likely means it is some type of fault in the unit it self and not the connection. Have you swapped it with another unit to make sure its the unit itself? If so try these. The first and most simple is the easiest to fix. It may sound odd but dirt and other contaminants can cause a great deal of interference "static" when they get worked into the metal connectors that carry signals. If that is the case, I recommend that you unplug the device and use "electronics" contact cleaner on all the connectors and if possible the metal contacts themselves. If it is not a containment then it could be a loose connector blown speaker/mic or even a solder joint inside the device. If that is the case you may have to have it repaired.
Hope this helps.

Here is a direct link to all Southwestern Bell's products - Manuals - and Accessories!

http://www.swbfreedomphone.com
The phone number for their product support is
1-800-366-0937
they are open M-F 8:30AM - 9:00PM EST and
Sat 8:30AM - 12:30PM EST

Thanks
Len
Need more help? Just ask! We'll dig further!

google speakerphone 210 manual for choices.

Question edited for clarity. Question moved from Video Consoles category. Trying to find a manual. Are you sure that model is correct? Eircom should give you a manual PDF. https://www.google.com/search?q=Eircom+perform+100+manual and https://www.google.com/search?q=Eircom+perform+100 ..

Good question but no 'make model (what it is). Base units have an antenna, make sure it is extended. Make sure the batteries in the satellite hand sets are good as they send out the signal to the base unit to be 'in range'. Not sure about the PIN request, refer to the manual. They are all online. Google make model manual ..