20 Most Recent Euro-Pro EP1005 Iron - Page 5 Questions & Answers

It sounds like your even-tempered iron is in a bad temper! I can think of no reason that you couldn't pull the plug from the wall socket. There is no iron of that model name, so I am puzzled by whole thing in your 'Anonymous' post. Disconnect the power at the breaker. Cut the wire with side cutters and throw the iron in the bin. Remove the wall socket from the wall and replace with a new one and throw that in the bin as well. Buy a new Rowenta next time. https://www.google.com/search?q=black+decker+even-tempered+iron ..

Error code 021 on a Turboion Croc Classic flat iron indicates a problem with the temperature sensor. This error can prevent the flat iron from heating up properly and may cause it to shut off unexpectedly. To fix this issue, you can try the following steps:

1. Turn off the flat iron and unplug it from the power outlet.
2. Use a small screwdriver to open the back cover of the flat iron and locate the temperature sensor.
3. Carefully inspect the temperature sensor for any signs of damage, such as bent or broken wires, loose connections, or burnt components.
4. If you notice any damage to the temperature sensor, you will need to replace it with a new one. You can purchase a replacement temperature sensor from Turboion or from a third-party supplier.
5. Once you have installed the new temperature sensor, reassemble the flat iron and plug it in. Turn it on and check if the error code 021 is still appearing.
6. If the error code persists, you may need to contact Turboion customer support for further assistance. They will be able to provide you with more detailed troubleshooting steps and help you resolve the issue.

I need to know how to pull the handle is in stuck posion

It will be a Security Screw Nancy. There are a few different types, Torx is the most common, but others have a triangular slot and are popular on domestic irons. You need a set of security screwdrivers or screwdriver bits. Or you can take the iron down to Home Depot and ask someone in the tool department.Tool to disassemble Black & Decker Digital Advantage Iron...

Hi, please lower the amount of water that you're putting into the iron by half and your problem should go away. You can also turn up the iron heat a little bit. Thank you.

Hi, Please wash the inside of the steamer with a mixture of 50% water and vinegar. You can use a brush to remove any mineral deposits. And if all else fails use heated water to pour into your device (you can double check this in your manual). Thank you.

Question edited for clarity. Question moved from Coffee Makers. One of the links says the lid must be raised. https://www.google.com/search?q=steam+press+KB-217B%2C+alarm ..

Idc really what's better only cuz as of right now this is what I have a gift from a friend who recently passed, I need the book instructions on how to put it together cuz for one I've never put one together & 2 I dont have the book. So if anyone knows where to go to find out how to put together &/or the pieces needed cuz all I've got for my kirschmann water home still is the main piece fitted with inside the I think copper circling tubing,the top n bottom pieces with nothing else. So can anyone point me in the correct direction please ?

Has it ever been descaled? https://www.google.com/search?q=ultra+XL+steam+not+getting+up+to+temperature ..

Regarding the Black & Decker Iron. You all talk about how to put water in the iron but none answer the question how to do that? What part do we remove or open to change or put in the water? Please answer this as soon as possible. This will also be on my Facebook to anyone there can you too help me?

I would try the manufacturers web site.

I have a genesis iron,it lights when it is on but does not become hot .it stays cold.What might be the problem?

Question edited for clarity, guessing your iron is a 'Rowenta' and not a 'Rowner'. You need a multimeter to test the element for continuity and the switch / thermostat for correct operation. It usually results in buying a new one. They are classed as disposable items when they fail. https://www.google.com/search?q=rowenta+dx9080+not+heating ..

It could be a faulty thermostat or faulty connection

Does it look like a Star? That is a Torx. https://www.google.ca/search?q=torx+screwdriver ..

Question edited into English. Either the element has failed, or the rotary temperature switch is broken. The water pump is mechanical and not related to the iron not working. ..

LARGE RUBBER BANDS HELP MESSY CORDS

Look behind the sole plate for two screws. There are always screws hidden somewhere, and often they are hidden behind decorative plastic covers that need prying off. Small appliances like this are generally considered disposable items when they fail. Good for you trying to keep items out of landfill.

If it is stuck, descale it.

unknown need to diagnose for a short or in circuit or switch failure