Janome Memory Craft 9500 Computerized Sewing Machine - Page 9 - Answered Questions & Fixed issues

Contact Janome directly to inquire.

The foot control may have failed.

Please follow this link :-) Https://www.sewingpartsonline.com/instruction-manual-janome-harmony-1017.aspx

Try contacting Janome to inquire.

It is a good idea to take the bobbin out and turn the hand wheel. Monitor the turning hook that goes around. See if there is threads or fabric stuck. Make sure the hook isn't cocked. The hook goes around in an indented area called the race.Make sure you put one drop of oil on the race.After this turn the hand wheel and try to notice if there is any changes to the resistance. If not you may need to talk with a professional for repair.

Does the light come on? If so, could very well be a computer component that has failed. ...

Likely the total number of needle bar strokes since it was manufactured.

sadly no clue as never knew there was a rewind belt on any sewing machine

Janome would be a possible source.

IF YOU WERE A DEALER OR A REPAIR SSERVICE PROVIDER THEY MIGHT SELL YOU ONE BUT THEY DON'T GIVE THEM TO CONSUMERS

Contact Janome directly to request a manual for model 1722, and to inquire about obtaining a replacement base plate.

Contact Janome directly to request the "guide" for model jd1722.

Force it hard in the direction of travel. You can't break it. Told to me and demonstrated by a dry cleaning shop. The remove the needle and run it flat out for 15 seconds. If it happens again, you need it serviced and timed.

Take a photo or the actual machine to a Janome Dealer and they should be able to point you in the right direction. ...

Just damp oil in each parts of it. Not too much because your garments will be oiled too

I had an older Janome machine, and when i needed a manual, parts etc. I found it best to go straight to the company. Saves you time and frustration searching. Do a google search for that brand of machine and add the model number and see what comes up. Be sure to to add the word manuals, or operating instructions too. Like this, from your google search type: (Janome sewing machine operating instruction, or manual) or something close to that. If nothing else you will probably find several dealers, and repair shops that should be able to help you. And you might try a web site called Free online manuals,to download. They usually have everything. Good luck. Lynn

If the symbol looks like ] [, then this isn't generally an error message. The machine is in bobbin wind mode. Move the bobbin winder spindle to the left. If the spindle is all the way to the left, then you have a problem with the bobbin winding mechanism below the bobbin winder spindle slot. The sewing machine isn't correctly getting the message of where the spindle is. The Janome 6260 Quilter's Companion manual is available from Janome. The current link is https://www.janome.com/siteassets/support/manuals/retired/computer/inst-book-6260qc.pdf . See page 11 (13 of the PDF). I hope this helps. Cindy Wells

Yes, but it's not considered a consumer serviceable component. It requires spliting the plastic housing in two. It may or may not require desoldering.

if your using your standard universal needle, you can. just make sure your using the right number for the material

https://www.google.com search of the internet found a link to a manual for sale: https://manualsoncd.com/product/janome-new-home-654-mystyle-30-sewing-machine-instruction-manual/