Singer 8280 Mechanical Sewing Machine - Page 7 - Answered Questions & Fixed issues
I have an arrrow 129
If you sewing machine is a Singer go to singerco.com and download a free manual, Arrow as far as I know only makes a cabinet.
9/12/2010 2:42:42 PM •
Singer 8280...
•
Answered
on Sep 12, 2010
•
89 views
Trying to sew curtains!!!! Been
check both upper & lower tensions
also check your needle to see if it's bent-roll on a flat surface to see if it rolls correctly
if the needle is blunt-it makes a popping sound when it penetrates the fabric
also check the bobbin area for lint & loose thread-some fabric produces more lint than others
make sure the bobbin isn't warped
make sure that the bobbin is correctly in the bobbin case & that the bobbin case is correctly inserted in the machine
9/2/2010 3:33:23 PM •
Singer 8280...
•
Answered
on Sep 02, 2010
•
83 views
My presser foot lever wont
Make sure that your needle is in the highest position, turn your handwheel towards you, not away from or else you will mess up the timing
8/31/2010 1:05:27 AM •
Singer 8280...
•
Answered
on Aug 31, 2010
•
612 views
Top thread isnt picking up
Use a fresh needle and make sure that you place the flat side to the rear when you insert it. Use a coin to turn the needle screw. Also, get a free downloaded manual from
www.singerco.com
8/21/2010 7:13:54 PM •
Singer 8280...
•
Answered
on Aug 21, 2010
•
126 views
I have read that you can download manuals for free
yes you need to go the top bar topic Customer Support and select Instruction manuals. Enter your model number in the area indicated and it will give you the free download or the option to purchase the hard copy.
8/19/2010 11:28:05 PM •
Singer 8280...
•
Answered
on Aug 19, 2010
•
128 views
My bobbin winds loosley
This means the thread is not pulling to the winder fast enough. Check the tension silver knob that guides the thread to the bobbin. It may be too tight.
hope that helps!
8/19/2010 11:22:46 PM •
Singer 8280...
•
Answered
on Aug 19, 2010
•
162 views
Need help
mcdevito75 here, Here is Singers contact info, 800- 4 singer or 800-474-6437 they will direct you to singer in Toronto.
7/19/2010 11:47:33 PM •
Singer 8280...
•
Answered
on Jul 19, 2010
•
111 views
Hand wheel on Kenmore model 1345 sewing machine
Take the bobbin and bobbin case out first of all and check for any minute pieces of thread stuck, lightly poil with WD40, find out where the squeak is, very important otherwise the machine may seize and it will cost a lot of money, oil all moving parts lightly
6/27/2010 7:15:01 AM •
Singer 8280...
•
Answered
on Jun 27, 2010
•
470 views
The casing that the bobbin sits in is out how do I
put the bobbin in its case then pull some thread out and pass it thru the bobbin case slot and under the tension spring .. put the bobbin and case over the shaft that is in the main unit .. the open side of the case goes in first .. make sure the bobbin doesnt fall out .. rotate the bobbin case until its finger lines up with the notch in the main case .. the bobbin case should latch in place on the shaft notch .. place the top thread under and to the back of the pressure foot then turn the machine one turn .. that will loop the top thread around the bottom (bobbin) thread ... now use a card or screwdriver to push both threads from under the pressure foot toward the back of the machine ..
6/22/2010 9:10:17 AM •
Singer 8280...
•
Answered
on Jun 22, 2010
•
544 views
Not finding what you are looking for?