20 Most Recent LG WM2688HWM TROMM SteamWasher - Page 9 Questions & Answers

theres three screws in the back that need to be removed. then you push the panel towards the back wall, it slides back then you can remove it. Good luck. _MJ_

Sometimes if the heavy bed spreads or curtain may cause this problem. Switch OFF machine manually and restart after the spin stops.
If problem repeats.
Check springs or shock obsorber inside the machine. The tub will be suspended with this.

check voltage across motor in switch on mode. if power reading seen, the problem is in electric motor. replace it.

I had the same problem with my LG Tromm and was ready to throw away every one of my towels they were so rank smelling. As a last resort I filled the detergent area with one cup of white vinegar and ran a load through on hot. Then I washed them with just a tablespoon at most of detergent. They came out smelling fine, the mildew smell was completely gone. How long it will last, I don't know.

I also read somewhere recently that we all use way too much detergent in our washers and dishwashers. And surprise, surprise, the post went on to say that too much detergent in your towels/clothes can leave a musty, mildewy smell in them.

Now when I do laundry, no matter what it is, I use about 1/4 of the amount of detergent called for, even though the HE uses so much less. In all, maybe 1-2 Tbsp, and everything comes out just as clean.

Also, try using a product from Clorox just for front loading washing machines. It's Clorox Washing Machine cleaner...it seemed to help with the overall smell. And I agree, I will never buy this particular machine again.

LE is caused by an unbalanced tub. Check the dogs that hold it in place.
You can unplug the machine for a bit and plug back in and it will reset itself

no there is no belt on lg washers,the unit is magnetically spun by the stator assembly behind drum

leave door slightly open when not in use

you need a new timer switch it is what the knob is hooked to

check that u have power from outlet to washer, if you have power feeding the unit, press the power button, if no power then u probably have a defective main board, that controls everything in the washer, what is your model number and serial number i could probably give you the part number.......

jus email me
[email protected]

is your motor spinning at all, if it is slow moving then you have a problem with your stator assembly...........need to replace a part for your stator............

just email me and i'll give you more info.........
[email protected]

your pump motor is out, whats your model number and serial number, i could probably source the pump motor part number for you......if your washer is filled with water, and not draining, your motor is out........these LG motors go out fast....

This tool can be purchased from LG. Call 1-800--243-0000 option 1

Not necessary to blame LG, ALL of these front loaders are garbage. They were designed poorly and released too soon just to have a new gimmick.

I am not a repair professional. I am a 78 year old man who has been making his own repairs for about 50 years. So the machine ID doesn't mean much to me. I came to fixya looking for a schematic for an really old AM/FM radio and just happened to see that more than 4,700 people were asking for help with a washer repair. I recently had a washer repair of my own and at that time I found an excellent video on youtube which showed me how to take my machine apart. This video (direct drive washer repair) made it possible for me to do my own repair. You probably don't have any idea of the wonderful help you can get from youtube videos. Your first stop should be at youtube. Just search for the help you need. You could search for "clothes dryer repair" or "clothes washer repair" or "dishwasher repair". If you are not able to view and/or download the videos, or after you've seen all you want to see, I suggest you go directly to www.applianceaid.com where they have very good step by step trouble shooting and repair information on washers, dryers. and dishwashers as well as other appliances. Another excellent site is www.acmehowto.com If you have a direct drive top load washer and need help taking it apart these youtube videos are wonderful help. I was so impressed with them that when I saw all these people needing help, I wanted to tell them about the videos. If you look at the back of your top load washer and the panel is solid (no small inspection plate to remove, which would indicate you have a v-belt drive) chances are you have a direct drive and this video (direct drive washer repair) is just what you need. After you've seen all the appropiate videos, or if you have a belt drive washer, you will probably still need help in determining what the trouble is and how to fix it. I suggest you go to www.applianceaid.com where they have very good trouble shooting and repair nformation on most washers and dryers, dishwashers and many other household appliances. I think you'll find what you need there. Another excellent site for DIY help is www.acmehowto.com Don't worry about the timer on a washer, they hardly ever go bad. I realize I haven't solved your problem for you, but I hope I have sent you where you can get help to solve the problem. Good luck with it.

No, probably have a bad water pump, very common for this washer. I would pull the washer out, lean it against your wall, brace or block it up so you can crawl under it. You will see where the drain hose comes out of the bottom left of the drum and enters the drain filter. Remove the hoses and check for debris or clothes in the hoses or where the drum outlet is. If no restrictions then replace your water pump. Good Luck, Appliance Specialists

Are you sure it's an LG? I looked up in the service manual and found nothing.

Take the front off and check all the hoses going in and out of the drain pump.

I don't even know if this is possible on your machine but see if you can get bleach into your water intake port, if the green slime still shows up you may need to contact your board of health because it sounds as if the problem is your incoming water and you may need to have your water company clean their pipes or even replace them, did you perchance loose water pressure before the slime became a problem?

Regular cleaning maintenance is required to prevent odor build up inside the machine. The LG WM2688HWM has a TUB CLEAN feature, a special cycle for the cleaning of the inside of the washer. This cycle uses a high water level with higher spin speed.

1. Remove any clothing or items from the washer and close the door.
2. Open the dispenser drawer and add liquid chlorine bleach ONLY to the bleach compartment.
3. Close the dispenser drawer slowly to prevent the bleach from spilling.
4. Turn on the machine then press the EXTRA RINSE button for 3 seconds.
5. Press the START/PAUSE button to start.
6. Leave the door open to dry the washer door opening, door seal and door glass after the cycle is complete.

You have a blocked pump. If you are handy you can fix it yourself, or you can call a serviceman.