Top 20 LG CINGULAR C2000 Hands-Free Headset (Silver) 98323 / AAYN4264A / 22802H Headset Questions & Answers

Try restriction codes here
http://www.mobile-unlocker.com/lg/rs2wp8/
you need to specify the phone model and network provider

Try 0000. After a lot of trial and error, I tried that and got it to work!

ndfjdfjd

You get your puk code from your service provider. Phone them and ask for it!

call 18003310500

Have you tried contacting your service provider to enquire as to if they are blocking the 453 number and not your phone? Are you sure your service is working "local" i.e when you phone someone are you phoning via the local mobile service or is it routed via your mobile service from wherever you come from to honduras? You could also try doing a phone reset.

Several Solutions 1. If its only one or two people doing it, simply ask them to stop, if they do not, or its more than two people, move on to step two 2. Call 611, ask if they can disable the TXT Messaging for those numbers, if they cannot then, its doubtful that they can disable TXT completly, however still ask. but i dont think you can, i know i cant with my service. Also ask for a refund on the txt's youve received 3. If not, change your wife's number, i think 555-DONT-TXT will work :P, good luck

If the LG Tone Infinim HBS900 is not pairing with your Apple iPad, there are a few things you can try to troubleshoot the issue:

1. Check the Bluetooth settings: Make sure that Bluetooth is turned on and that the LG Tone Infinim HBS900 is in pairing mode. To put the device in pairing mode, press and hold the power button until the LED light flashes blue and red.
2. Check for software updates: Make sure that your iPad has the latest software updates installed.
3. Check for other connected devices: Make sure that the LG Tone Infinim HBS900 is not already connected to another device. If it is, disconnect it from that device before trying to connect it to the iPad.
4. Check the distance: Make sure that the LG Tone Infinim HBS900 and the iPad are within close proximity to each other. Bluetooth devices typically have a range of around 30 feet.
5. Reset the LG Tone Infinim HBS900: Hold down the power button for 10 seconds, release, and then hold it down again for another 10 seconds.
6. Reset the iPad's network settings: Go to Settings > General > Reset > Reset Network Settings.
7. Check if the device is in pairing mode, if not activate it.

If none of the above steps resolve the issue, you may need to contact the manufacturer or a professional technician for further assistance. It's recommended to check the user manual of your device before trying any of the above steps, as the process of troubleshooting the pairing process can vary depending on the model and manufacturer.

have you replaced battery? 1. charger is not working 2. battery is bad.

Believe this or not, I had the same problem. The fix... Cleaned out the ear wax from the hole that got packed in there on my first use. No kidding. Hope that solves our situation.

resolder one in

if check both voltage and current rating both are same no problem can connect

sould't be doing this

You need to replace the battery in the headset.

You can't use bluetooth headphones,

What is wrong with it?

take it back and have it examined under warranty

Really poor choice of words. I understand you are frustrated. The speakers need to be charged or take batteries. There should be a charging jack. When the unit is charged and turned on, you can go to your phone and activate the Bluetooth and you should be able to see the speakers on a list of detected blue tooth device. Select that device and see if it asks for a KEY. If it does then you can look for a label on the speakers or google the model number.

Only one earbud working means, most often, the thin cable that lead to right side earbud is broken inside.

On the Android Google cell phones, you can download an APP called WiFi Analyser. Perhaps iPhones have a similar APP available? Now you can see a display of all the WiFi traffic around you. With this choose the least busy channel. The next advice is to put the device on your LAN that does the WiFi in a clear space and high up in your premises. This gives you all the chance you have of getting a better signal. Now do the same for your JBL box within reason.