Konica Minolta bizhub 161f All-In-One Laser Printer - Answered Questions & Fixed issues

If the problem persists initialize the Fax board (Service Mode =>Fax =>Initialization

firstly press menu then press quick setting then twoo time press left arrow then again press quick setting then press left aroow and after this press right arrow service mode will open at ur machine select "Maintenance Counter" now in this option select, 0 and press ok.

on a Bizhub 161f? Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

Power off the machine, ensure the sub power switch is on that is the one on the control panel, now hold down the utility/counter button and turn on main power switch, wait to see trouble reset on screen the touch get OK then power off. Wait 10 second power on. if code comes back replace the fuser unit do not reset again or the machine can catch on fire the code you are resetting is for the fuse the HOT Part, that could ruin a perfectly good day Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

The bright that normally come on under the big glass is having issues, replace the scanner assembly can't just get the lamp. try this web site for starters Precision Roller Printer Toner Cartridges Parts and Supplies Office... Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

found it. it's "sysadm"

Este código significa que la vida las partes de su desarrollo + unidad de imagen se ha caducado. Ahora es el momento de reemplazar las partes.

hi its link for driver http://www.konicaminolta.eu/en/business-solutions/support/download-center.html and you may find here drivers

maintence call(m2) call service

C0500 is a warm-up error on those little machines. Try holding the stop button while switching on, that should reset the code. It sometimes happen if it's kinda cold, or when the power dips. If the code comes back, you'll have to replace the fuser unit.

maintenacne call (m1)

That is just the format it saves it in. Open the document and tell it to save as and you can change the: "Save as type:" to the type of document you want.

Open the front cover.Pull out the PHD carefully and install the new one.

how to fix c0502 probem inkonica 7220

Press STATUS, YES, DOWN & UP ARROWS on Zoom for the counter. Page 3-38 on USER GUIDE BOOK
http://kmbs.konicaminolta.us/productsattachments/manuals/bizhub_161f_User_Guide.pdf

No, you can enter only IP address.

First of all check all the buttons on the panel.Any button should not be pressed inward. now strike gently on the lcd screen and panel.usually it becomes ok if not then call your tech rep because it will be complicated for you to handle such kind of job which you never did before.

here is a simple and 100% working solution, if you cannot get the scanner mode, then no problemo, just open www.google.com now in search bar write, 'FREE DOWNLOAD IRFANVIEW" download irfanview from any link, now open irfanview by double clicking on it, now click on "FILE" tab, at the bottom click on "select twain source" as you select this option you will see a new box in which you see bizhub 161f is also shown, now select it from that list and press OK, now press ctrl+shift+A and press ok or enter. your bizhub 161f will scan the file and will save it in your computer, usually in c:/, check the directory where it (IRFANVIEW) is saving the file.

60,000 copias

1-turn the machine off, 2-press the "STOP" button, 3-Turn the machine "ON" 4-keep the "STOP" button pressed. 5-wait until the main display shows. 6-release the "BUTTON"
Machine will not disturb you again
Best of Luck.......