Top 20 Konica Minolta bizhub 161f All-In-One Laser Printer Questions & Answers

The bright that normally come on under the big glass is having issues, replace the scanner assembly can't just get the lamp. try this web site for starters Precision Roller Printer Toner Cartridges Parts and Supplies Office... Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

Power off the machine, ensure the sub power switch is on that is the one on the control panel, now hold down the utility/counter button and turn on main power switch, wait to see trouble reset on screen the touch get OK then power off. Wait 10 second power on. if code comes back replace the fuser unit do not reset again or the machine can catch on fire the code you are resetting is for the fuse the HOT Part, that could ruin a perfectly good day Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

hi its link for driver http://www.konicaminolta.eu/en/business-solutions/support/download-center.html and you may find here drivers

If the problem persists initialize the Fax board (Service Mode =>Fax =>Initialization

on a Bizhub 161f? Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

C0500 is a warm-up error on those little machines. Try holding the stop button while switching on, that should reset the code. It sometimes happen if it's kinda cold, or when the power dips. If the code comes back, you'll have to replace the fuser unit.

Open the front cover.Pull out the PHD carefully and install the new one.

That is just the format it saves it in. Open the document and tell it to save as and you can change the: "Save as type:" to the type of document you want.

maintence call(m2) call service

how to fix c0502 probem inkonica 7220

maintenacne call (m1)

found it. it's "sysadm"

firstly press menu then press quick setting then twoo time press left arrow then again press quick setting then press left aroow and after this press right arrow service mode will open at ur machine select "Maintenance Counter" now in this option select, 0 and press ok.

Press STATUS, YES, DOWN & UP ARROWS on Zoom for the counter. Page 3-38 on USER GUIDE BOOK
http://kmbs.konicaminolta.us/productsattachments/manuals/bizhub_161f_User_Guide.pdf

Este código significa que la vida las partes de su desarrollo + unidad de imagen se ha caducado. Ahora es el momento de reemplazar las partes.

1-turn the machine off, 2-press the "STOP" button, 3-Turn the machine "ON" 4-keep the "STOP" button pressed. 5-wait until the main display shows. 6-release the "BUTTON"
Machine will not disturb you again
Best of Luck.......

ask from those who know the password, its customer service representative's secret............

if you print a report and there is no line its the adf **** glass so clean it with a rag and glass cleaner

Hi jdt_mk,

Sorry to hear you have a C-14a3 code.
In my experience, this code spells disaster for the 161f.
The image reader has failed. The part can be replaced, but the cost would almost outweigh the cost of replacing the machine.
I have personally had to deal with two 161f with the same code.
Both times we changed the machine (because it was on contract).

Sorry it's not good news