20 Most Recent
Konica Minolta bizhub 161f All-In-One Laser Printer - Page 2 Questions & Answers
Bizhub 161f will not turn on, there is only a
First of all check all the buttons on the panel.Any button should not be pressed inward.
now strike gently on the lcd screen and panel.usually it becomes ok if not then call your tech rep because it will be complicated for you to handle such kind of job which you never did before.
Can't get the scanner mode to connect
here is a simple and 100% working solution,
if you cannot get the scanner mode, then no problemo,
just open www.google.com
now in search bar write, 'FREE DOWNLOAD IRFANVIEW"
download irfanview from any link, now open irfanview by double clicking on it,
now click on "FILE" tab, at the bottom click on "select twain source"
as you select this option you will see a new box in which you see bizhub 161f is also shown,
now select it from that list and press OK,
now press ctrl+shift+A
and press ok or enter.
your bizhub 161f will scan the file and will save it in your computer, usually in c:/,
check the directory where it (IRFANVIEW) is saving the file.
Bizhub 162 autoshuts before photocopying
1-turn the machine off,
2-press the "STOP" button,
3-Turn the machine "ON"
4-keep the "STOP" button pressed.
5-wait until the main display shows.
6-release the "BUTTON"
Machine will not disturb you again
Best of Luck.......
C14a3 error code konica minolta bizhub 161f
Hi jdt_mk,
Sorry to hear you have a C-14a3 code.
In my experience, this code spells disaster for the 161f.
The image reader has failed. The part can be replaced, but the cost would almost outweigh the cost of replacing the machine.
I have personally had to deal with two 161f with the same code.
Both times we changed the machine (because it was on contract).
Sorry it's not good news
I have a Konica Minolta
Reset all settings to factory defaults./
Press power button for 10 seconds then start again.
Then go to printer menu settings and reset all settings.
Also pull ink cartridges and check there is not any paper jam .
Clean all dust from all parts.
Let me know if you need more assistance.
Thanks.
Not finding what you are looking for?