20 Most Recent Konica Minolta bizhub C351 All-In-One Laser Printer - Page 9 Questions & Answers

software is corrupt or the control panel is bad

the fax is disabled or something is wrong with phone line

you cannot reset nvram, you need to check your firmware. if you got the wrong fw it will do that. you can get into service mode by holding down the utility/counter button while bootup press the reset button and then press sequence for service mode initialize nvm and it will need correct fw then you good

did you have to reload the drivers on the server?? if so then there is an option tab on the driver that you have to enable the features of your bizhub.

Google the full error.
this sounds like a font realted postscript error.

It's called "Manual Bypass paper lifting failure". The manual says to check Tray 2 vertical transport motor. Check the wires to see if the are okay. Pull out tray 2, remove back cover, remove wire assembly from 4 wire saddles, remove 2 screws and the motor assembly. The should be 2 motors on the assembly and the one u need to look at is the bottom one. hope this helps.

Not possible on a Konica-Minolta

this is not a network problem.because machine is receiving documents thats why light is blinking. check the paper in the tray whether they are of correct size, change the paper size from computer, or call your tech service rep it may be due to usb cable or faulty network cable, or it may be the problem of main communication board of photocopier machine.

1. Select black on the main copy screen. 2. Select the Utilities/counter button. 3. Select [DETAILS]. 4. Select [2. USER SETTING]. 5. Select [3 Initial settings]. 6. Select [Current Settings]. 7. Return to the main screen.
ftp://207.18.56.26/software/BPG/UserbizhubC351CopyOperFW_G4.pdf
page 12-21

The latest 64-bit printer drivers are available via the Konica Minolta Download Selector. Access the Selector from the KMBS public site (http://www.kmbs.konicaminolta.us) Support & Drivers tab or from SSD Web Support (CS Expert Support) by clicking on 'Download MSDS, Drivers, Firmware and more'

We hope you tell us what the error say ?

USERS GUIDE of Printing Operations Page 3-5
http://kmbs.konicaminolta.us/productsattachments/manuals/UserbizhubC351PrintOperFW_G4.pdf

Press "utility/counter" then "details" then stop, 0, 0, stop, 0, 1
This gets you into service mode.
Then press Counter the Life.
Be very careful not to mess with much in the service mode tho.
Good Luck andThank You for using Fixya

1) push Utility/counter
2) system settings
3) paper tray setting
On the right side you'll see the trays. Highlight the tray and press the up button