20 Most Recent Konica Minolta bizhub C351 All-In-One Laser Printer - Page 5 Questions & Answers

FROM MANUAL

did not find c1486 but c1401 is a ram error probably have to do nvram recovery, that has to be done by a tech

The copier automatically adjust the color calibration every ON/OFF.Clean the LED line located under everyimaging unit(black,yellow,cyan,magenta).

CDCXX-trouble related to security.Try to reset:Turn OFF the copier.Press and keep pressed the Utility key and turn ON the copier.Keep pressed the utility key and wait to Trouble reset message appaire on the display.(1-2 minutes.).Release the utility key and touch the message.Turn OFF the copier,wait 1 minutes and turn ON.If the error code displayed call the technical rep. from Konica Minolta.

Fuser error, super easy!!! just turn off then turn on while holding the Utility/Counter button. hold for about 20-30 seconds you will see a small dot on the screen i think its in the right corner then you will see a Trouble reset box on touch screen, press it press start then turn off count to 10 turn on... done

C - 2104 The transfer/separation cleaning home sensor does not turn ON when a specified period of time elapses after the transfer/separator cleaning motor starts the backward operation from rear to front.Remove the transfer/separator corona unit (2 screw) using a vacuum cleaner and clean the sensors(2 pieces located front and rear side.

replace the image unit or replace the iu chip

They are under the toners. I think you use the t handle tool to remove them. be careful of the toner port flap. they break easily.

Konica Minolta Bizhub 600 Malfunction Detected C-2807.