20 Most Recent Konica Minolta bizhub C351 All-In-One Laser Printer - Page 2 Questions & Answers

what error Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

replace the fuser unit Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

could be a bad black image unit, xfer belt or fuser Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

was the computer os updated, 8.1 to 10 or ????? try this Self Help Product Support Konica Minolta Business Solutions Inc Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

this can be changed in service menu or with firmware update

you mean image unit for a c351? or toner cartridge? Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

NVRAM kind like computers BIOS. Data multiple errors. Need a tech to come out and re-flash the copier firmware not the drivers. the firmware is only available thru a secure Konica Minolta server. or the NVRAM CHIP is bad worse case so is the board. And it is C-D370, C-D366, and C-D251 which deals with Image control board. it to mite require its firmware re-flashed. Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

control is dead or the image control board have a tech come out to check it out. Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

what about the by pass tray???? Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

English please:) Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

That is because your registration is off which mean the magenta/cyan are not laying on top of each other so you get (blur) a purple, Stabilization has nothing to do with that you need to have registration procedure run, that mean printing out a certain print out and checking the the print out to determine which way to compensate the LED 's. Just me but I would call a Technician in the morning to come out, and run the test, it not simple once you see him run it you will see why. Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

C-D 370 = NVRAM Data multiple errors C-D 366 = NVRAM Data error C-D 251 = No JPEG board mounting at JPEG board mount setting You need some serious firmware re-flash and maybe a new NVRAM chip which house certain counter info for the machine its like you BIO chip on a computer, and or Image control board $$$$$$$$$$$$ Firmware is only available to Konica Minolta Dealerships and KMBS tech, its not drivers but the operating system of the copier and companies protect that via secure servers. Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

what color and copy to or both print and copy Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

Your firmware (Operating Software for the copier is bad) Will require a tech, as the firmware for the copier is located on a secure web site only access able via Konica Minolta Dealership and KMBS, they like to protect there firmware Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

will require install kit do you have that and the hard drive kit to seperate kits Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

try this site Self Help Product Support Konica Minolta Business Solutions Inc Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

the bright light under the big glass failure to turn on, raise the doc feeder then hit the start button to copy something a very bight light should come on, if not get the exposure lamp and or board replaced try this once if the code comes back do above 1. Turn OFF the Main Power Switch. 2. Turn Main Power Switch ON again while pressing the Utility/Counter key more than 10 seconds after. 3. Touch [Trouble Reset]. 4. Check to make sure that [OK] is displayed and the it has been reset. 5. Turn off the Main Power Switch and turn it on again more than 10 seconds after, and make sure that the machine properly starts. Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

try this site for the service manual Service manuals electronic components datasheets and equipment schematics... Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

what where you doing when this happen Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

where in the finisher Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f