Top 10 Konica Minolta bizhub C250 All-In-One Laser Printer Questions & Answers

Konica Minolta bizhub C250 All-In-One Laser Printer Logo

Question

  • 103,031 People Helped

Konica Minolta Admin Password

I forget my Admin password, have the Bizhub C252 Series, how do i reset my password to default? and what is the default password?

Posted by on

Answer

  • Most Helpful of 13 Answers

Try 12345678.  That worked for me for my Bizhub C250.

Posted on Apr 02, 2009

Question

  • 25,474 People Helped

error code c-5102 in Konica minolta c252

can u pls advice how to fix this problem
thanx

Posted by on

Answer

  • Most Helpful of 2 Answers

Here’s your GEEK-steer …

This thread appears to cover the solution to your problem related to error "C5102: Main Motor’s failure to turn":
http://www.copytechnet.com/forums/konica-minolta/15515-c252-m1-operation-test.html

In addition, here’s the link to “Bizhub C250P” related support downloads:
http://kmbs.konicaminolta.us/content/support/supporthome.html

Hope this helps, and please post back with a status report and/or any further assistance you might need.

"Today's the best day of my life...and NOW you're part of it!"

Posted on Dec 16, 2008

Question

  • 17,492 People Helped

How do I clear error message C-2558 for the Konica

How do I clear error message C-2558 for the Konica Minolta bizhub C253

Posted by on

Answer

  • Most Helpful of 5 Answers

tis error means abnormal tonder density in the balck image unit take the blacke image unit out and shake it while holding it level and put it back in the machine to reset the error code leave the machine on and open then close the front door

Posted on Nov 16, 2009

Question

  • 17,309 People Helped

SMB Scanning

A few days ago the error started occuring again. Whenever I try to scan to my SMB Box I get a Login Error and a Forward TX error. I get these two errors every time I try and scan now. Has anyone had this problem or know what the issue is? Thanks!

Posted by on

Answer

  • Most Helpful of 6 Answers

I had the same issue and fixed it by adding the group "Everyone" to the shared folder permissions (where I was sending my scans) and assigning the "Everyone" group rights to "change" and "read".

Posted on Jan 20, 2009

Question

  • 16,002 People Helped

Error code c0202. What is

Error code c0202. What is it mean? Konica-minolta bizhub c250

Posted by on

Answer

  • Most Helpful of 2 Answers

Most likely there is paper stuck in the very back behind one of the trays. Take both trays out and see if there is any paper jammed (could be a small piece). Put trays back in but leave them open, turn off the printer, unplug it, wait 5 minutes, plug it back in, turn it back on and push in the trays.

Posted on Dec 23, 2010

Question

  • 15,455 People Helped

BizHub C252 - error Code C-2555 (Malfunction Detected)

My daughter was playing with buttons while something was printing. A page became stuck (which I have since pulled out) and now it it gives me the "Malfunction Detected - Contact your service representative C-2555). In trying to save $$ is there anything I can do myself to detect and correct the problem. I have tried powering off and turning the maching off as well. Your help is greatly appreciated.

Posted by on

Answer

  • Most Helpful of 4 Answers

C-2555 relates to a low toner density in the yellow imaging unit. I'm sure your daughter pressing buttons did not cause it.
I suggest you release the yellow imaging unit (the bottow row of units)
Just realease and pull it out a little way. Then switch the machine on with the door open. It won't start, but will ask you to shut the front door. Reseat the yellow imaging unit and shut the door. The machine should go in to a stabilization mode and then work.
However, if it comes back, I suspect a new yellow imaging unit will be required.

Posted on Feb 07, 2009

Question

  • 13,929 People Helped

Cannot scan to email Konica Minolta 250 Bizhub

When I add the email address on the smtp scan to email settings it says invalid value. This is after I have pinged the email server address as well!

Server email address is correct and bizhub is on nw as I can connect to it via Mozilla.

Thanks

Allan

Posted by on

Answer

  • Most Helpful of 1 Answers

To scan to email, Administrator email address must be set in the machine (any bogus email address will work too).
Also, email server address must be input as IP address if DNS or WINS is not running in LAN.

Posted on Mar 09, 2008

Question

  • 12,396 People Helped

how to clear c-0204

how to clear c-0204

Posted by on

Answer

  • Most Helpful of 3 Answers

C0204 - Tray 2 Elevator failure - The Lift-Up Sensor is not blocked even after the lapse of a given period of time after the lifting motion has been started.

1. Turn OFF the Main Power Switch.
2. Turn Main Power Switch ON while pressing the Utility/Counter key.
3. Touch [Trouble Reset].
4. Check to make sure that [OK] is displayed and the it has been reset.
5. After turning off the Main Power Switch, turn it on again more than 10 seconds after and check if the machine starts correctly.

Reset your Toners and Imaging units for Minolta Bizhub and CF series.
http://www.chipreset.eu

Posted on Nov 27, 2009

Question

  • 11,488 People Helped

Error Message C3451

error displays on main screen stating "malfunction detected. Please call your technical representative" C3451 Any one know what that means and how to fix it? Kindest Regards

Posted by on

Answer

  • Most Helpful of 5 Answers

It is a fuser error.

Try resetting. To reset a Rank A error follow these steps:

1. Turn OFF the Main Power Switch.
2. Turn Main Power Switch ON while pressing the Utility/Counter key.
3. Touch [Trouble Reset].
4. Check to make sure that [OK] is displayed and the it has been reset.
5. After turning off the Main Power Switch, turn it on again more than 10 seconds after and check if the machine starts correctly.
If the error recurrs then do the following:
1 Check the Fusing Unit for correct installation (whether it is secured in position).
2 Check the Fusing Unit, PWB-M and PU1 for proper connection and correct or change as necessary.
3 Change Fusing Unit
4 Change PWB-M
5 Change PU1

Posted on Jan 04, 2008

Question

  • 11,395 People Helped

konica minolta c 200 password

what is the defoult admin assword, please help?

Posted by on

Answer

  • Most Helpful of 3 Answers

It was 12345678 for our C250 - hope this helps. And sys_admin (solution 1) - You are a complete idiot. Your answer was useless. If you were working for me, I'ld fire you...

Posted on Feb 23, 2009

1,252 questions posted

Ask a Question

Usually answered in minutes!

Top Konica Minolta Office Equipment & Supplies Experts

Norman  J Weimar Jr
Norman J Weimar Jr

Level 3 Expert

6850 Answers

Adorjani Laszlo

Level 3 Expert

1316 Answers

George Mclaughlin

Level 2 Expert

364 Answers

Are you a Konica Minolta Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

bizhub C250 All-In-One Laser Printer bizhub

  • bizhub C250 All-In-One Laser Printer bizhub

Most Popular Question

clear error message c 2558 konica

  • Office Equipment & Supplies
Loading...