Marantz SR8500 Receiver - Answered Questions & Fixed issues

has the power whent out at home if so you my have to unplugg it for aboult 30sec then plugg it back in that sould take care of it

No! there is a problem in the audio output ic's "more than likely shorted parts" check to make sure there are no shorts in the speaker wiring, if okay! I'am afraid it is bad outputs.

The audio output stage has a load causing the auto protect to kick in. First check speaker wires for shorts, if okay it is the above mentioned.

http://www.ideyi.org/Wenyangzeng/blog/11-12/236670_9bc81.html

Check the speakers impedance. it should be greater then 6ohm otherwise you overload the system. Also, if the speaker sytem is rated (in Watts) below the amplifier's power it overloads the amp at higher volumes.

Check the settings on your dvd player!. It might be set to PCM
instead of HDMI.

You may not be using an active input to test. Try attaching an fm antenna and using the tuner. Sone inputs are set to digial and will not make sound with the analog input. The input selector does turn it on. Saves a step.

DVD should be connected to an input on your tv not the monitor out.

CD/DVD players use a protocol; Open tray. Insert disk. Tray switch tells mechacon that the tray is shut. Attempt to focus on disk. If focus is acheived, then it will spin up and try to read the disk otherwise it will ask for a readable disk. If the tray keeps opening, I would suspect the tray detect switch is malfunctioning, maybe the drive belt has stretched.

Yes. Most probably belt is broken. Download the service manual from given link and replace the belt as per procedure given in the manual. Marantz TT-4000 Service Manual, Service Manual, Repair Schematics (electronica-pt.com)

This is very strange the Service Manual is free and everywhere, but on the Marantz website if you scroll down to the bottom there are dozens of SR- Models in the AV Receivers category but it completely overlooks the SR-66, but there is an SR-6006! https://www.marantz.com/en-us/support/product-archive%C2%A0 It exists though https://www.hifi-review.com/149388-marantz-sr-66.html I would contact Marantz Support. https://www.google.com/search?q=Marantz+SR-66+owner%27s+manual ..

Question edited for full 'make model (what it is). Question moved to Marantz. It is very old, but help here https://www.google.com/search?q=Marantz+Cc870+manual ..

Hold the 'display' and 'zone select' buttons, then press power. Display should blink all segments. Let go of buttons, and your good to go

It is a nice gift! Specs state Multi-Room Speaker Out Assignable Surround Back Speakers as for Zone 2 Speaker A/B Yes Looks like Page 47 of the manual onwards

SR5005

Marantz https://www.marantz.com > sr5005_u_en_ug_v00 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 91 pages

Marantz SR5005 User Manual - ManualsLib

ManualsLib https://www.manualslib.com > ... > Receiver > SR5005 View and Download Marantz SR5005 user manual online. AV Surround Receiver. SR5005 receiver pdf manual download.

No, it is a Surround Sound Receiver for taking television signal, or a signal from another device and amplifying it to multiple speakers.. https://www.google.com/search?q=Marantz+SR+68 ..

The Marantz NR1607 is an AV Receiver, and the CY920 error code is not a recognized error code for this product. It's possible that this is a custom or specific error code for your device, and I would recommend contacting Marantz support or the manufacturer for more information. They may be able to provide you with a solution or more information on what the error code specifically means and how to resolve it.

Parece que el problema puede estar relacionado con la fuente de alimentaci?n de su dispositivo. Es posible que desee verificar si la fuente de alimentaci?n proporciona el voltaje y el amperaje correctos. Adem?s, es posible que desee verificar si hay conexiones sueltas que puedan estar causando una interrupci?n en la fuente de alimentaci?n. Tambi?n puede intentar restablecer el dispositivo a su configuraci?n de f?brica para ver si eso resuelve el problema. Si estas sugerencias no funcionan, es posible que deba consultar el manual para obtener pasos de soluci?n de problemas m?s detallados o ponerse en contacto con un t?cnico calificado para obtener ayuda.

1. Hardware issue: The CD player may have a hardware issue, such as a damaged laser or faulty electronics, that is preventing it from reading normal CDs.
2. Firmware issue: The CD player's firmware, which is the software that controls the device, may be outdated or corrupt, causing it to only read Super Audio CDs.
3. Compatibility issue: The CD player may not be compatible with normal CDs, and is only able to read Super Audio CDs due to their specialized format.

In terms of adjusting the laser pick-up, it is generally not recommended to try to adjust the laser pick-up yourself, as it can be a delicate process that requires specialized equipment and knowledge. If you believe the issue may be related to the laser pick-up or other hardware, it may be necessary to seek the assistance of a qualified technician or the manufacturer. If the CD player is unable to read the content of a normal CD and is returning to 00:00 tracks on the display, it is possible that the issue may be related to the laser pick-up or other hardware. It is also possible that the issue may be related to internal ICs or other electronics, in which case it may be necessary to diagnose the issue further to determine the cause and find a solution.

Have you tried a new cable?

NOT A CAR/TRUCK SO MOVED TO AVR THE AVG. AVR HAS OVERLOAD DETECTOR AND LAMP AND RELAY THAT FAILS WHEN OVERLOADED. PER THIS SIMPLE LIST

1. SPEAKER WIRES SHORTED.ENDTO END
2. SPEAKER SHORTED.
3. TOO MANY SPEAKERS WIRED IN PARALLEL.(THE ohms rule violated)]
4. the amps side is failing.
5. the overload detector is bad, telling lies, and shutting it down.
6. try no speakers, to see if it trips.
7. It is 1999 and is old. even bad caps inside now.

only does Digital inputs: coaxial, optical Video Connections: component, composite, SVHS the rig has fan sensor failure and over temp too, and the service manual covers that. see protector DRIVE here, it shuts down all outputs via relays. free to read and DL. https://www.manualslib.com/manual/1066247/Marantz-Sr-18-U.html?page=6#manual