Top 20
Olympus WS-300M Digital Voice Recorder - Page 5 Questions & Answers
I need to down load
You can download the manual in a choice of languages from
http://www.olympusamerica.com/cpg_section/cpg_support_manuals.asp?id=1388
I am getting 'input blocked' message on my
Copy your audiofiles to computer then format your Olympus unit (worked on my VN-5500PC) After that you can use your unit again no "Input blocked" messages, sorry for my bad English
I don't have driver CD
http://www.olympusamerica.com/cpg_section/cpg_support_downloads.asp?id=1272
and
http://www.olympusamerica.com/cpg_section/cpg_support_accessories.asp?id=1272&ct=79
Sound stopped
Please check to see if the tape is running. It is possible that the tape was running dry and created the sqeak with a static noise over the head. the belt would have failed then and stopped the tape movement. hence without the transport your song is not played. So please check this out. Otherwise it is important to clean the head and check if your amplifier is working. test for voltage and audio tone. if not confirmif the audio amp is faulty and replace. Hope this helps. Good day
How to use olympus telephone pickup tp7
Look this instructions is the same operation
Comparable Models:
- SONY ECM-TL1 Cellular, Cordless, Analog, Digital, VoIP Telephone Record Adapter
- Olympus TP7 Cellular, Cordless, Analog, Digital, VoIP Telephone Record Adapter
- TC-L Cellular, Cordless, Analog, Digital, VoIP Telephone Record Adapter
- CC-10 Cellular, Cordless, Analog, Digital, VoIP Telephone Record Adapter
- CC-20 Cellular, Cordless, Analog, Digital, VoIP Telephone Record Adapter
- TC-W Cellular, Cordless, Analog, Digital, VoIP Telephone Record Adapter http://www.tvps.com/ecsdownloads/ECS-EBPR/ECS-EBPR-Cordless-Cellular-Telephone-Recording-Adaptor.pdf
Olympus DSS Player ver 7 installation, use and file backup proble
simple convert them all to .wav or mp3 then can play anywhere.. thats what i do... now can some one help me.. my dss 2 doesn't work right in the very nnoying new win 7 computer.. keep getting a dll error and olympus has the drivers all archived and not updated for win 7
hope this helped you
I have an olympus WS560M
can you remove the lithium poly battery from inside, then reconnect it and see if that clears it.
I just deleted (remotely from my mac) all the
I found the answer on this site: http://www.olympusamerica.com/cpg_section/cpg_support_faqs.asp?id=1126#22
I held down the menu button--got to the sub menu and restored it to the original default setting. It cleared everything and now I can record tons again. Note for future--don't delete on your mac--only delete the files on your dvr to save you the trouble of having to do this.
A dr that i am transcribing for has the olympus
you can try Express Scribe http://www.nch.com.au/scribe/index.html
which is free whereby you dont need to have pedals or you can buy Olympus Module 5 around £120 either one you can convert digital files.
I just installed brand new
Hi May,
My name is Mike, I'll help you get going again.
I'm assuming your recorder worked previously. That there were no other problems before the original batteries died.
I want you to pull the new batteries out. If you have a battery tester, check them (even though they are new). Batteries do have expiration dates, there effectiveness can diminish over time. IF there is any doubt, replace them again.
Check the contacts inside you recorder (especially if any of the previous batteries leaked). If they aren't clean and shiny, use an emery board to bring them back.
Replace the batteries paying attention to the positive / negative positioning indicated in the battery compartment. Then close it up.
Switch it on. If it has VOR (Voice Actuated Recording), toggle it.
That should do it.
Thanks for using Fixya.
Best regards,
Mike
How do I erase on my vn 5200PC ?
if the problem persists you could plug it to the pc and open your device and manually deleting or formating the device, formatting the device will erase everything on it
I have a Digital Voice Recorder DS-2....how do I
Press the FOLDER button to choose a folder. Press the FF or REW button to
choose the file you want to erase. Press the ERASE button. “CANCEL” is flashing.Press the down arrow button to choose the
“START”.
“START” is flashing. When the up arrow button
is pressed, it will return to the flashing display of Cancel.
Press the MENU/SET button
while “START” flashing.
The display changes to “FILE ERASE!” and erasing will start.
“ERASE DONE” is displayed when the file
is erased. File numbers will be reassigned automatically.
Not finding what you are looking for?