20 Most Recent Polaroid FLM-3232 Television - Page 9 Questions & Answers


You still need a converter box for it to work off the antenna.

Good Luck and Please Rate

Polaroid... | Answered on Jul 03, 2009


Find your rca sat. remote code under the mitsubishi code list in the RCA sat. booklet, it worked for my Polaroid 42" dtv. My prob. is finding the sat. code to program the remote which came with the Polaroid DTV. If anyone has this code please post it.

Polaroid... | Answered on Jun 28, 2009


I had the Same issue. on a 50PF9431D/37 set. Many Plasma Set's use a LJ44-00118A PS-505-PH Power supply from Samsung. Known to have this common problem. If you can, or have a friend that can Solder components?. Unplug your set remove the back panel & locate your power supply. It will be the PCB in the center of the set just above the Video/Audio connections. http://www.shopjimmy.com/power-supply-unit-lj44-00118a-from-philips-50mf231d-40.htm. Is a Link to a photo of the PCB. Make a note of the locations of all cable connections then unplug them all. Un-install PCB, Check all Fuse first. I believe their is 5 or 6 of them on the PCB. Then replace the two 3300uf 10v 105C Radial capacitors at C8060 & C8059. Look to see if the Caps are deformed and or split at the top. The location of the caps are in the Lower bottom edge of the PCB. A local shop may Carrie them if not, digi-key has them. Part # http://search.digikey.com/scripts/DkSearch/dksus.dll?Detail&name=493-1754-ND. Total cost was $7 with S/H.

Polaroid... | Answered on Jun 25, 2009


go into the menu there is a setting for the speakers to shut them off or switch to external.

Polaroid... | Answered on Jun 17, 2009


This may be a liitle more informative to you....if you haven't already read it. This fixed my problem, I had 2 blown caps.

Hope this helps!
djrhemi345

Polaroid... | Answered on May 23, 2009


You need a main module----Part #909-kso-gf321xa Encompass Parts.com
List price is $462.00
Craig----Hi-Tec Electronics

Polaroid... | Answered on May 22, 2009


thre are several components that can make a buzzing sound, especially a bad power component or capacitor. check the capacitors to make sure they are installed in the board correctly. the stripe on the cap must line up with the white mark on the board under it. remove the back panel lay the tv down on a blanket turn it on and see if you can isolate the noise component by ear up close. and visually check for swollen capacitors the top will be pushed up round if bad if good it will be flat on top. warning if tv is less than a year old make the place you bought it replace it. so you dont void the warranty.

Polaroid... | Answered on May 21, 2009


Use the TV/Cable rf jack and auto program the TV.
Craig

Polaroid... | Answered on May 08, 2009


I own a One-for-All universal remote (model URC-4220), and my booklet says the setup code for a Polaroid TV is 0765.
Hope this suggestion, helps you out. Please take a moment to rate this info, by using the rating system below. Thanks.

Polaroid... | Answered on Apr 04, 2009


Did you check the fuse ?

There is chance for loose connection .

Did you check the connection from power supply to circuit board ?

Polaroid... | Answered on Mar 30, 2009


Most universal remotes don't have the screen mode button. So, your better off with the orginal remote for the TV.
The cheapest place I can find one for you is NewRemoteControl.com
It's going for $49.95
It's a little pricey, but it will have all the option buttons for the TV.

I hope I answered your question. Please rate me. :)

Polaroid... | Answered on Mar 06, 2009


what is the make of ur tv

Polaroid... | Answered on Mar 05, 2009


I had same problem, I fixed changing main board I found from FLM-3237 that used same part #, It worked perfect.

Polaroid... | Answered on Mar 03, 2009


Common problem with Polaroid 32 and 37" television. Problem is most likely the control board, at cost of around $400. physically disconnect power to television. keep disconnected for 30 min. Plug TV back in and turn on. That may fix the problem temporarily, but more problems are sure to come...

Polaroid... | Answered on Mar 02, 2009


Try to read your product manual caferfully all information are cited in the manual in order to have a smooth operation of your unit.

Polaroid... | Answered on Mar 01, 2009


hi there,

may i knw exactly the model that you have.

Polaroid... | Answered on Feb 23, 2009


You are most likely out of luck using these as universal remotes. You are better off purchasing a Logitech remote and programing it for the Polaroid and your Directv box.

Polaroid... | Answered on Feb 09, 2009

Not finding what you are looking for?
Polaroid FLM-3232 Television Logo

260 questions posted

Ask a Question

Usually answered in minutes!

Top Polaroid Televison & Video Experts

The Knight
The Knight

Level 3 Expert

76046 Answers

matt martin
matt martin

Level 3 Expert

1255 Answers

Jaime Hernandez

Level 3 Expert

2337 Answers

Are you a Polaroid Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Polaroid Televison & Video

  • Polaroid Televison & Video

Most Popular Question

anyone know unirversal remote brand

  • Televison & Video
Loading...