20 Most Recent
Polaroid FLM-3232 Television - Page 11 Questions & Answers
Polarid 32inch lcd
I don't have a problem to the solution,but my tv is not working it wouldnot comeon it appears that polorid has a problem with the pwer supply
6/25/2008 7:12:15 PM •
Polaroid...
•
Answered
on Jun 25, 2008
My tv it dead
Good luck finding the part. My tv is in the shop waiting for this part for over a month.
4/30/2008 8:16:36 PM •
Polaroid...
•
Answered
on Apr 30, 2008
Polaroid FLM-3232 LCD Television
Sounds like a crack in the lcd panel or a toren or seperated ribbon cable on the lcd panel,could also be a bad memory board but not likely,dropping the remote could not cause this problem unless the remote hit the tv when it was dropped
4/4/2008 2:54:39 PM •
Polaroid...
•
Answered
on Apr 04, 2008
Psychedelic colors
Have you checked out the HDMI cable? A composite cable failure can cause the same.
3/29/2008 6:59:11 PM •
Polaroid...
•
Answered
on Mar 29, 2008
Polaroid FLM-3232
home insurance....? even if you find a replacement screen its going to be expensive and take some work to replace..
3/24/2008 11:51:08 PM •
Polaroid...
•
Answered
on Mar 24, 2008
TV doesn't turn on
first warper2001 your power supply is probanly bad the voltage checks was you getting 80 volts on the output side of the transformers each one should be labeled as to the output voltage, at least one of them should only supply 24 volts, the transformer went bad probably overheated and melted the protective coating in the trans and let the voltage increase. could have burned out lots of things. unplug it, use a screw driver and short across the plug ins and the ground on the cord to drain the capicitors in the unit. the ohms check the components through each and to ground. check for opens and shorts. when checking a board remember that you will get a little bled back because you cannot isolate the parts. so most of you ohms readings should be large amounts of resistance if not you have a problem with that component, wire coils excluded. ie transformers they are best voltage checked. hello motorcity kid. i sent you a buddy message but also remember these items of advice.
3/18/2008 4:55:54 PM •
Polaroid...
•
Answered
on Mar 18, 2008
Codes
if you have the manual that came with it all the codes are in the last pages of the book if not go to polaroid .com and down load the owners manual for free it will have the codes in the down load.
2/25/2008 7:36:06 AM •
Polaroid...
•
Answered
on Feb 25, 2008
TV just turned off by itself and wont turn on....
LCD type TV's ought to be the most reliable type, but these Polaroids
all have early failures of the power supply. Only way to fix it
is to replace the whole electronic module. Call Polaroid cust.
service and be persistant because they are used to abuse from angry
customers. Well, it is possible to replace the elec. caps in the
power supply and maybe the FETs, but us experts are kinda keeping those
details for the paying customers.
Good Luck
2/22/2008 5:56:00 AM •
Polaroid...
•
Answered
on Feb 22, 2008
FLM 3232 PROBLEM
the control board is out on all of your tv's very common problem the board new was 479.00 . part no 909 KSO GF321XA, do a internet search, you will see i am right, if interested i have one good used and i will accept offers, its easy to install would take 30 minutes with four screws and five wire harness plug ins. can do your self.
2/19/2008 3:06:57 AM •
Polaroid...
•
Answered
on Feb 19, 2008
HD cable question
i have the same LCD and my problem was the same as you, you need a powerful antena like a out dor antena or indor antena whit buster
1/24/2008 8:27:11 AM •
Polaroid...
•
Answered
on Jan 24, 2008
FLM 3232 television low volume
I hooked my tv up and there is no sound coming from the tv. I do not have surround sound just the tv. How do I make it work I need volume please
1/15/2008 9:35:11 PM •
Polaroid...
•
Answered
on Jan 15, 2008
POWER SUPPLY
send me an e mail at [email protected] and i will get it for you. send me the exact model number with your telephone number so i can geive you the exact cost and eta.
1/7/2008 5:57:19 PM •
Polaroid...
•
Answered
on Jan 07, 2008
Polaroid FLM-3232
These sets are known for this. You need to contact poloroid and
get them to cover it under warranty which I think they extended cause
of all the problems (lawsuits) They should send you a whole new module
which is pretty easy to swap out.
Try this phone # 866-690-9752
1/4/2008 5:07:04 AM •
Polaroid...
•
Answered
on Jan 04, 2008
Power Cord
a cheap replacement for you is a computer power cord its the same thing will work perfectly, if you cant find an extra let me know i have several extra.
12/31/2007 3:00:16 PM •
Polaroid...
•
Answered
on Dec 31, 2007
Polaroid 3232
i have found others that they did this same symptom when the ir board went out its only 9.95 plus installation.
12/31/2007 4:05:14 AM •
Polaroid...
•
Answered
on Dec 31, 2007
Not finding what you are looking for?