Supersonic FC-2245 13" TV/DVD - Answered Questions & Fixed issues

just turn off the power and open the back up and you should be able to get them, PLEASE TURN ALL POWER OFF BEFORE HAND - AND DISCHARGE THE TUBE BY LEAVING THE PLUG OUT AND PUSH THE POWER ON BUTTON ON - DO AT YOU OWN RISK

If you wish to get some details; check the site linked here. Viewing it in "Mosaic" will make surf easy Pull up older posts. Surf the site with patience. http://electronicshelponline.blogspot.com/ Unlock procedure to most popular brand TVs are given by one among the posts.

What happened to coaxial cable? Provide more details, please. Gopakumar Gopalan Google

Check and replace damaged component/s at its vertical sync: section circuit. If you wish to get some details, check the site linked here. Surf the site in "MOSAIC" view. It will make surf easy. Surf the site with patience. http://electronicshelponline.blogspot.com/

What is the problem you faces with this TV. Provide more details please. google.com/+GopakumarGopalan

If you wish to buy its original remote control, you have to contact the authorized service center. If you wish to buy a universal remote control, you should know about, which brand remote control have setup code to your TV/device brand. This detail will have the code list document attached to every universal remote control. The brand name of the remote control isn't a matter; but, its code list should have setup codes to your TV/device brand, otherwise you can't set it up with your device. Check out, which brand remote control have setup codes to your TV/Device brand. Setup code list & setup procedure to some popular brand remote controls are given. Check it, and determine which brand remote control should be bought, and buy that brand remote control, according to availability. google.com/+GopakumarGopalan

Ok on this model i had some problems with the H-tr or the Transistor in the Horizontal deflection it was burned so my advice is better go to repair man or just read some articles how to solder and use multimeter. Before doing some thing else.

You can get it at Wal-mart.or Dollar Store...hope this helps

try RV place they do have supplies for almost any truck

Codes are bound to the remote, not your set so the model of remote is required and none of the so-called 'universal' remotes really are.
I wish someone would bring a suit against any of these manufacturers using the term 'universal.'
At best, they are 'multibrand' and, with the proliferation of 'brands,' there never will be one that can rightfully claim to be 'universal.'
There may never be a code for your brand available in every remote.

Should be under warranty and allowed to bring it back. Don't force the DVD tray out as that may ruin your chances of an exchange.

The Supersonic FC-2245 has known DVD issues and thousands were returned for credit. You may not have a solution. They are also being replaced by the FC2835

That usually occurs due to overheating or a faulty power supply board. Sometimes are easy as fixing a dry joint. It may also be that the internal Lithium battery has failed. They only have a certain number of charge / discharge cycles. A new one is $76 so not worth paying someone to repair versus a new one. https://www.google.com/search?q=Supersonic+sc-499+powers+off ..

If you have a universal remote control, you can set it up to be compatible with your Supersonic TV or JEBSON 3003ES device. Follow the instructions included with your universal remote to program it for use with your particular television or device

Question edited for clarity, correct spelling of maker. Code for Supersonic

• Sunstech 31331, 24244
• Superior 22312
• Supersonic 35456
• Supra 32462, 34633, 33146, 44121, 43155
• Supratech 25231

Instructions, but I don't like the idea that it is a .zip file. Scan it first. https://files.remotecentral.com/manuals/19-1/ellies/index.html ..

Perfectly normal unless it is blinking. https://www.google.com/search?q=supersonic+sc-499+red+light+on ..

It depends what the Supersonic device is, but .... https://www.fixya.com/support/r29872378-universal_remotes_no_facsimile_remote ..

1. Hard Reset or Factory Reset: Try performing a hard reset or factory reset on your device. This process typically involves holding down specific buttons for a certain period or accessing a reset option in the device settings. Be aware that a factory reset may erase your data, but it could help resolve the boot loop issue.
2. Connect with Support: Reach out to Bushnell customer support directly. They may have specific instructions for troubleshooting a boot loop issue. Provide them with as much information as possible about the problem, including any error messages you may have encountered.
3. Check for Firmware Updates: Ensure that your device's firmware is up to date. If there are any available updates, install them as they may include bug fixes that address boot-related issues.
4. Battery Status: Ensure that the battery is charged and functioning properly. Sometimes boot loop issues can occur if the device is not receiving sufficient power.
5. Professional Repair: If none of the above steps work, it's possible that there is a hardware issue. In such cases, you may need to consider professional repair services or contact Bushnell for further guidance.

Ease the drawn out by prying gently with a blunt butter knife or look for the hole and use a paper clip in the hole and press. Then but a CD Lens cleaning Disc and run it a few times. The tracking Laser is as powerful as the Reading Laser and it can't read the track so throws an error. https://www.google.com/search?q=SuperSonic+SC-1312+stuck+DVD ..