20 Most Recent Vivitar ViviCam 5100 Digital Camera - Page 5 Questions & Answers

go to vivitar.com/support choose your model from the selection and you`ll find one there

contact support at [email protected] or try their webpage vivitar.com/support. it has a download section for drivers

You can download drivers for your device from

http://www.bioticaindia.com/vivicam-3715.html

Turn power off, Turn power on, Press OK, Press OK again to "Exit" Press-Mode, Press Mode again. Photo should appear. Press Left arrow to see other photos or Press Right Arrow to reverse the order.
Good luck!

i dont think that software for win xo is available for ur model of camera becoz it was a different era

u can go for a new camera now and u will fell a leap in quality and result in new cameras and price is also cheap u can find a very good digi camera for like near 125 $ or so Fuji is a nice brand

u can aks me more if u want

pls rate me well !

Regards

You have internal memory or external
either way us the USP wire , properly connect the camera to the computer...
turn the setting wher you see a sort of z shaped line with arrows at each end.
which power up on the camera the computer should respond and you should see in the drive listing under (My Computer) a new drive that is the camera's memory just open the folders up to where your pictures are located

Ask here, they find you any Vivitar driver: manualfox.com/driver.htm

Hi

Unfortunately there is audio capability on this camera. Video only.

Hope this helps. Please rate my answer

hi take out the memory card, there will be a small button on the side push it the oppersite direction, this will 'unlock' it.

regards

Go to vivitar . com and download manual and repair procedure.

It seems when I left the camera connected to the computer it finally did show the removable drive on my computer. It just took a while.

Do you reformat your cards every time you download your pics? The card may be corrupted. You may be able to clear it and reformat it through a card reader on a PC. If this isn't possible scrap the card and buy another one - and ALWAYS reformat it.

Vivicam 3315 S driver

Go to the Capture Menu. In the Capture menu, you can determine the conditions you would like to choose such as Size, Quality, Scene, EV, White Balance, ISO, Color, Saturation, Sharpness and Date Imprint. Press the MENU button and then scroll through the options. Choose "Date Imprint" option and then change it to OFF so that the Date will not be showed on the captured image. If you want the manual just download it from this site "http://www.retrevo.com/support/Vivitar-5100-Digital-Cameras-manual/id/200bh832/t/2/". Hope it helps.

Most probably find a Vivitar Vivicam 5190 manual here. Just send them a search request.

if you have a memory card in your camera you should be able to buy either an adaptor cable that the chip fits into on one end then usb plugs into your computer for about 15 bucks or you might luck out and your memory card might fit into the side of a laptop if you have one or a friend does. then it appears like "F" drive and whatever media package your computer has should pick it up hope this helped a bit

Ask at http://manualfox.com/driver.htm
They will find any Vivitar driver!

Do you have an SD card installed? If so try taking out the card and deleting the pics or re-formatting the card after installing in a computer.

It does not look good.
Here are some problems which could be with this camera:
LCD broken or bad.
CCD problem.

Since you go have some light on the green light, then that appears to be a LCD problem. this can happen if the camera had an impact to cause the LCD to be damaged or disconnected in some way.
For further help:
Go to:
http://vivitar.com/en-us/Support.aspx
Ask for your model.

Hello,
It seems that the transfer does not work with Service
Pack 3 of Windows XP but it works with Service Pack 2.