Top 20 Kingston Technologies 512MB DataTraveler I (DTI512KR) Hard Drive Questions & Answers

luck that it would not format or all of your school information would be wiped clean That is what formatting means ---clean page , no data , nothing do it again and press no when the question comes up

Scanning by what? What OS?

Some pen drives have a small toggle switch with them which make the drive write protected try locating that switch. If there is no such switch then try formatting the drive preferably from safe mode. you can do this by following these steps:1. Shutdown your computer or laptop 2. Insert USB Memory Stick into your laptop or Computer 3. Turn on laptop and then immediately start pressing (F key then Advanced Boot Options screen will come up 4. Select Safe Mode with Command Prompt 5. After loading files if your USB Memory Stick drive letter is (G) for example then write as 6. C:\windows\system32>G: and press enter 7. G:\>format G: and press enter 8. If ask you (Y/N) then press (Y) and press enter 9. Now a full format will start which remove write protection from USB Memory Stick.

If the drive fails to format, you can try it in other USB ports or a different computer. But if it continues to fail format then it is bad and needs to be replaced.

Please Re Formating And Try It Please Delete The Reclye Bin.

Are the files write protected or just your usb driveright click on the file select properties security make sure you have full controlYou have to be the computers administrator to change any values on any hard drive on your computer

click start control panel user accounts on the users tab click the name of the computer administrator you must have full control

click start click to open on my computer you should see your usb drive could be E: or something right click select properties there will be an array of options

select the sharing tab option then advanced sharing make sure you have a tick in the share this folder box

then click permissions make sure you have all 3 boxes ticked full control changes and read in windows 7

click start control panel user accounts click on the administrators account if you have made one or you will have to create one in windows XP click start right click on my computer select openRight click the icon of your usb drive (It should be E:/ or something) Click Properties in the menu that comes up Click the Sharing tab Click permissions And finally, click Allow next to Full Control. if you need more help with this post a reply hope it helps

When the flash drive is inserted and is still detected Kingston, flash drives can be repaired and the data can be saved. How to save data To save data, use software full version, for example, you can use EASEUS Data Recovery. After the data is saved, do the repair flash drive. Repair flash drive Kingston 1. Right-click the flash drive, select Format - select quick format. If this does not work, don't repeat, do the second. 2. Format from Administrative Tools. Win XP: click START - Control Panel - Administrative Tools - Computer Management - Disk Management - right click the flash drive - select Format - select quick format Win Vista & 7: click START - Control Panel - select View by: Large Icons - Administrative Tools - Computer Management - Disk Management - right click the flash drive - select Format - Perform a quick format - OK. If this does not work, don't repeat, do the third process. 3. Format using the software, the HP USB Disk Storage Format Tool. Make the process quick format. If this does not work, don't repeat, do the fourth.4. Repair the flash drive using the software HP Drive Key Boot Utility (Support Win XP, Vista, 7)How to install the HP Drive Key Boot Utility to the operating systemWin XP: double click the file cp006049.exe - select InstallWin Vista & 7: double click the file cp006049.exe - select extractHow to use the software HP Drive Key Boot Utility For Win XP, first wayInsert the flash drive - open the HP Drive Key Boot Utility - Next - select flash drives - Next - Create New or Replace ..., select Next - Next select Hard Drive - Create New File system, select Next - wait for the process is completed - Select Next - HP firmware Flash ..., select Next - wait for the process is completed - finish. Then, quick format the flash drive.For Win XP, second wayInsert the flash drive - open the HP Drive Key Boot Utility - Next - select flash drives - Next - select Backup/Restore - Next - click Restore - click browse, open file C:\Program Files\Compaq\hpdkbu\ flash\initrd.img - Next - wait until the process is complete.For Win Vista & 7, first wayInsert the flash drive - double click cp006049.exe - for example, extract to C:\HP Drive Key Boot. Open folder C:\HP Drive Key Boot then double click file hpdkbu.exe - Next - select flash drives - Next - Create New or Replace ..., select Next - Next select Hard Drive - Create New File system, select Next - wait for the process is completed - Select Next - HP firmware Flash ..., select Next - wait for the process is completed - finish. Then, quick format the flash drive.For Win Vista & 7, second wayInsert the flash drive - double click file hpdkbu.exe - Next - select flash drives - Next - select Backup/Restore - Next - click Restore - click browse, open file C:\HP Drive Key Boot\initrd.img - Next - wait until the process is complete.Descriptioninitrd.img files, the image file for the schema partition flash drive capacity <= 2GB. For capacity >2GB, example: 4GB, 8GB, 16GB, 32GB, etc when we use the initrd.img file, will be changed to 2GB capacity. To restore the capacity of flash drives, do the Low Level Format. To make the process of Low Level Format, use software HDD Low Level Format Tool.How to restore the capacity of flash drive KingstonOpen HDD Low Level Format Tool - select drive - Continue - click S.M.A.R.T - click Get SMART Attributes - click the tab LOW LEVEL FORMAT - click Format This Device - wait for the process is completed - Finish. Then, remove the flash drive from the computer, then insert it again. Then do a quick format the flash drive. FinishHope it helps.

When the flash drive is inserted and is still detected Kingston, flash drives can be repaired and the data can be saved. Cause, there is damage to the partition table Solution: 1. Save the data. To saved data, you can use EASEUS Data Recovery software. 2. After the data is saved, to fix the flash drive using the software HP Drive Key Boot Utility (Support Win XP, Vista, 7) How to install the HP Drive Key Boot Utility to the operating system Win XP: double click the file cp006049.exe - select Install Win Vista & 7: double click the file cp006049.exe - select extrackHow to use the software HP Drive Key Boot Utility For Win XP, first way: Insert the flash drive - open the HP Drive Key Boot Utility - Next - select flash drives - Next - Create New or Replace ..., select Next - Next select Hard Drive - Create New File system, select Next - wait for the process is completed - Select Next - HP firmware Flash ..., select Next - wait for the process is completed - finish. Then, quick format the flash drive. For Win XP, second way: Insert the flash drive - open the HP Drive Key Boot Utility - Next - select flash drives - Next - select Backup/Restore - Next - click Restore - click browse, open file C:\Program Files\Compaq\hpdkbu\ flash\initrd.img - Next - wait until the process is complete.For Win Vista & 7, first way:Insert the flash drive - double click cp006049.exe - for example, extract to C:\HP Drive Key Boot. Open folder C:\HP Drive Key Boot then double click file hpdkbu.exe - Next - select flash drives - Next - Create New or Replace ..., select Next - Next select Hard Drive - Create New File system, select Next - wait for the process is completed - Select Next - HP firmware Flash ..., select Next - wait for the process is completed - finish. Then, quick format the flash drive.For Win Vista & 7, second way: Insert the flash drive - double click file hpdkbu.exe - Next - select flash drives - Next - select Backup/Restore - Next - click Restore - click browse, open file C:\HP Drive Key Boot\initrd.img - Next - wait until the process is complete.Description initrd.img files, the image file for the schema partition flash drive capacity <= 2GB. For capacity >2GB, example: 4GB, 8GB, 16GB, 32GB, etc when we use the initrd.img file, will be changed to 2GB capacity. To restore the capacity of flash drives, do the Low Level Format. To make the process of Low Level Format, use software HDD Low Level Format Tool. How to restore the capacity of flash drive KingstonOpen HDD Low Level Format Tool - select drive - Continue - click S.M.A.R.T - click Get SMART Attributes - click the tab LOW LEVEL FORMAT - click Format This Device - wait for the process is completed - Finish. Then, remove the flash drive from the computer, then insert it again. Then do a quick format the flash drive. Finish Hope it helps

click start control panel administrative tools computer management device manager scroll down universal serial bus controllers you could see a yellow question / exclamation mark? ! or a red X

you will need to update/reinstall drivers

right click to reinstall drivers

if you can see your usb drive but its not working

ports (com&lpt) right click update driver if this fails to fix the problem

check the USB leads that attach to the motherboard usually red white green black make sure they are securely seated and have no dust build up on them dust will cause static and a lot of unforeseen problems for a computer and its parts

if you need more help with this post a reply

hope this helps you

click start control panel administrative tools computer management device manager scroll down universal serial bus controllers you could see a yellow question / exclamation mark? ! or a red X

you will need to update/reinstall drivers

right click to reinstall drivers

if you can see your usb drive but its not working

ports(com&lpt)right click update driver if this fails to fix the problem

check the USB leads that attach to the motherboard usually red white green black make sure they are securely seated and have no dust build up on them dust will cause static and a lot of unforeseen problems for a computer and its parts

if you need more help with this post a reply

hope this helps you

You will have to be the computer administrator to change any values on any hard drive

click start control panel user accounts you should see a box with the administrator and the guest account if you have made one click on the administrator this may vary depending on which operating system you have

click start click to open on my computer you should see your hard drive usually C: right click select properties there will be an array of options select the security tab option then advanced make sure you have full control in windows 7 this will also apply to usb drives right click on your usb drive select properties select sharing then select advanced sharing make sure there is a tick in the share this folder box If you are running a Windows XP OS then you might be able to: - click start right click on my computer select open- Right click the icon of your Flash Drive (It should be F: D: or something) - Click Properties in the menu that comes up - Click the Sharing tab - Click permissions - And finally, click Allow next to Full Control.? click start click on my computer to open you should see your drive another way: click start all programs accessories open windows explorer click on my computer you should see your drive click to open it also right click select send to desktop to make shortcut click start click on my computer you should see your 4 GB data it might be listed as a mass storage device right click then select format another way is to control panel administrive tools computer management disk management right click on your -GB data traveller select format if you need more help with this post a reply hope this helps you

Write Protection on any portable USB Device can be applied by the physical lock provided on the card adjuster or some times provided on the pen drives, so make sure to make your drive not write protected by moving the lock in right direction.

But even after moving the physical lock for write protection the problem can happen due to some virus action. This happens when some virus or script which applies the registry hack to make any drive write protect when connected to the computer, In that case follow the procedure below to remove write protection from your pen drive.

1. Open Start Menu >> Run, type regedit and press Enter, this will open the registry editor.

2. Navigate to the following path:

HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\StorageDevicePolicies

Note: If the registry key StorageDevicePolicies key does not exist, you will need to create it
change value to 0 and press enter

good luck

To remove write protection:

• Open Start Menu >> Run, type regedit and press Enter, this will open the registry editor.
• Navigate to the following path:

HKEY_LOCAL_MACHINESYSTEMCurrentControlSetControlStorageDevicePolicies

• Double click the key WriteProtect in the right pane and set the value to 0
• In the Data Value Box, press OK button
• Exit Registry, restart your computer and then again re-connect your USB pen drive on your computer.

That is it, done. Goodluck

click start control panel administrive tools computer management disk management right click on your drive select properties click tools you should see click check now click start two boxes automatically fix files and scan for and attempt recovery of bad sectors place then a tick in both boxes then select check now start or you might tick one box then return after its finished the first repair then return and tick the second box you should not do anything while the chkdsk utility is in progress any input may damage this drive

hope this helps

click start control panel administrive tools computer management device manager scroll down universal serial bus controllers you should see a yellow question mark? right click to reinstall drivers if you can see your usb drive but its not working ports(com&lpt)right click update driver click start click on my computer you should see your usb drive right click then select format another way is to control panel administrive tools computer management disk management right click on your drive select format if you need more help with this post a reply hope this helps

USB drives can be write-protected by modifying the StoreageDevicePolicies Registry key and WriteProtect Registry value.
click Start>run>regedit to open Registry Editor. and press control+F to open the find dialogue box and type "usb device" or "driverdesc" to open usb mass storage device or type "usb mass storage device" in the search windows. And right click on it and delete. This will set the policy value to 0. then insert your usb device. It will work fine.
# Remember: do not delete any unknow files in the registry as this will make some programes not work as usual.
also

If you are running a Windows XP OS then you might be able to:

- click start right click on my computer select open
- Right click the icon of your Flash Drive (It should be F:/ or something)
- Click Properties in the menu that comes up
- Click the Sharing tab
- Click permissions
- And finally, click Allow next to Full Control.




hope this helps don

what you need to do is connect your usb drive, then open a command prompt window (Programs->accesories) and in this window type:

diskpart.exe
and press enter

you will be presented with another window similar to the first. In this new window type:

list volume
and press enter

this will show you a list of all drives connected to your machine.

Next type:
select volume *


where * is the volume number of the required drive listed in the list volume section.
and press enter
This will select the drive for the change you are about to make.

type:
detail volume
and press enter

this will list all of the attributes to do with the selected drive, you should see in there that the disk is write protected.

next type:
ATTRIBUTES DISK CLEAR READONLY
and press enter. Once the window has finished what it's doing you can close all of the command prompt windows and your disk should be ready to use again.

Hope this wasn't too long winded and has been of some use to you.

click start control panel administrive tools computer management disk management right click on your drive select properties click tools you should see click check now click start two boxes automatically fix files and scan for and attempt recovery of bad sectors place then a tick in one box then select check now start or you might tick one box then return after its finished the first repair then return and tick the second box (I have found better results ticking the first box then reurn and tick the second box) you should not do anything while the chkdsk utility is in progress any input may damage this drive also you might need to do this hope this helps you

Hello,

Try to format to another PC.

or
You should install your OS again ,only the reason your PC affected with virus.
At the time installation you must delete partition and create partition and install.
Installation guide click here.

http://www.microsoft.com/windowsxp/using/setup/winxp/default.mspx


There are an another solution you can try also.
DONT USE KAV because it will delete your windows file
http://www.techmixer.com/free-f-secure-rescue-bootable-cd-to-clean-virus-and-malware/

OR
http://www.techmixer.com/free-bootable-antivirus-rescue-cds-download-list/
HOW MAKE BOOT CD
http://www.raymond.cc/blog/archives/2008/07/26/free-f-secure-rescue-cd-300-to-clean-virus-from-unbootable-windows/

SET THE BIOS SETUP for BOOT FROM CD
http://www.windowsreinstall.com/articles/bios/

Hope this helps. If you need more information, reply me soon.
Thanks .

http://files.extremeoverclocking.com/file.php?f=197 This program will effectively format any sort of USB drive.