20 Most Recent Kingston Technologies 512MB DataTraveler I (DTI512KR) Hard Drive - Page 6 Questions & Answers

In the Windows 98 OS environment:

1. Download:
Kingston 512MB DTI Win98 Driver

2. Install

1. Download this tool:
http://dl.dropbox.com/u/4040651/HPUSBFW.EXE

2. Format

(Before removing USB flash drive click on the Safely Remove Hardware icon and then click on USB flash drive you want to remove)

1. Download:
Kingston 512MB DTI Win98 Driver

2. Install

1. Download this tool:
http://dl.dropbox.com/u/4040651/HPUSBFW.EXE

2. Format

Hello,
Try to format it using the method describe below:
May be it will help
Go Start>Setting>Control Panel>
Or Start>Control Panel>
Then open> Administrative Tools>Computer Management>
Then select In the left Column Click disk management
Then locate your pen drive and try to format with fat file system
Also you can try to remove the partition and create new one
ok...
Regards
Uttam

Sorry, you can't unlock it, that's the main feature of this product - good security.

Windows 7 is just new enough, it may not reconize it.

try 2 formact in NTFS,or take 2 any service centers
kingston toll free: 1800 425 4515

advice:in furture plz dont take kingston products b'cos there r many fake products comming to market like no serial no. etc better go 4 transand as they provide good after sales

Hello

There is a small lever on the card itself, you can switch it between lock or unlock. Just push it to the unlock function. Hope this can help you.

Best regards
Andrea

This is whats known as dirver conflict
There are two ways to approach this
The system controlPanel veiw devices by connetion
and then plug the drive in and wait for 5 minutes to see if it is recognized.
The second is to update the drive software or firmware and pray for a happy ending.
http://driverplex.com/wp-content/uploads/2009/08/all-drivers.php?brand=Kingston&tid=se-en-us-1002152&gclid=CJ27hcmUx50CFRdc2godqCFvqw

The above is a driver resource i havent checked it so be careful.

Those files are nothing but lost clusters recovered. If the data is very important for you, there is a chance to get it recovered, however, it won't be free. You can contact any local vendor or try the following link.

http://www.data-recovery-usb-drive.com/

regards

Sandeep

Insert your pen drive, RUN this tool AMVO-VARIANTS by keeping in any drive , then restart the system without removing pen drive from system , after reboot your pen drive be ok.

Go to device divers and make sure you have the right driver installed...some other download you may have done might have changed the original driver..try to download new driver from original sight

First!

Here is a link to a page explaining how to do this:
http://blog.ashfame.com/2008/03/disable-usb-autorun-save-pc-usb-viruses/

And here is a link to a page explaining how to achieve the same result but in a different way:
http://wiki.answers.com/Q/How_to_disable_autorun_in_pen_drive

left click on my computer and go on manage then click on disk management there there u will see your pen drive you must have pluged it in before doing this then left click click format follow the procedure

there is fault in pen drive if its under warranty replace it

The best thing that you can do is to locate the drivers for the pen drive from the manufacturers supporting section on their website.
Once you are on this website, select the drivers that meet the version of windows your computer is running (i.e. Vista, XP)
Once you have downloaded the file, run it and install it. This should fix your problem :o)