Top 20 Netopia 2247NWG-VGx Wireless Router (2247NWGVGX) Questions & Answers

To change your SSID, connect your router to your PC with an ethernet cable, go to your web browser (Intenet Explorer, Forefox, Chrome etc) and type 192.168.1.254, and press return.

This will open the control panel for the router.
Select 'EXPERT MODE' from the menu on the right, and accept the warning prompt. Then click on 'CONNECTION' and the 'WIRELESS' on the menu on the right.

In the main window you can then change the SSID for your network.

You can also change some of the other options in this window such as enabling closed mode (whether to broadcast your SSID or not), change security protocol, password, etc.

You need to forward these ports on both your router, and computer aswell as firewall you got one of those.

• Port 88 (UDP)
• Port 3074 (UDP and TCP)
• Port 53 (UDP and TCP)
• Port 80 (TCP)

You might aswell need to open 1863 (UDP and TCP) if you want to use video chat for the kinect.Listed ports need to be forwarded when connecting to XBOX Live A more detailed guide to setting it up is available here: http://support.xbox.com/en-us/xbox-360/networking/network-ports-used-xbox-live

YES

Reset the wireless by pushing and holding the RESET button, this will reset to default settings. Then you can reconfigure the SSID and Security. Take a look at this: http://www.routerpasswords.com/

Try

GENERAL ROUTERS RESETING

Follow this instructions:1. connect via hard wired connection using your PC (network cable)2. open your internet explorer or any browser.3. type the numbers 192.168.1.1 on the address bar4. you will be routed to your router's settings, type admin for USERNAME: and admin for PASSWORD.5. look for the basic setup/settings6. look for the wireless settings7. under your SSID comes the WEP or WPA-PSK option8. that is your wi-fi password, then modified it and remember the password you use for you will need to enter it on your pc when you are connecting via wireless connection.you can select ASCII for password. it should be alpha numeric or combination of letters and numbers.9. select save and apply. then you are good to go.

"Try http://www.fixya.com/support/r11153882-general_routers_reseting"

First make sure the dialling is done to the correct number - it will be listed in the contract papers.
Phone your ISP and request them to confirm you that those are indeed the correct username and password.

Hello
Check with your router manufacture on how to log in to the router.

Once you have logged in,check that upnp or universal plug and play is checked to on.
This should allow x box to work through the router.

well, if you have been blocked by the admins of the website , u can still get an access to the website, as what the admins do is , they block ur IP, and hence u cant access it, if you want to get the access, then, change your IP address. to know How to change, it , u can mail me @ [email protected] i can't publish it online. good luck

if you have the manual with the unit locate where is the reset button then push it for 10 sec.

Change NAT 3 to NAT 2

You can put it onto tiles, so it will get at least a bit colder, but this is general problem of this routers, so I am affraid I am not going to help you.

Anyway, try those tiles, or some cooler enviroment

If you have a working Windows wireless machine, you can extract the key from the Windows machine and use it on your other devices.
Download this: http://download.cnet.com/WirelessKeyView/3000-2092_4-10614187.html
and then run it.
You can learn the WEP or WPA key in use which you can then use on other devices.
If there are no other working wireless devices, you will need to log on to your access point and reset the password there. The instructions for that depend on your access point. For the Netopia, you can refer to the instructions at http://www.netopia.com/support/hardware/manuals/SoftwareUserGuideV761-Clsc.pdf

hello arthur, you wont need the eircom firmware you just need a firmware update for the netopia 2247nwg-vgx

go here fill out the details and download the firmware and update the router with it

http://www.netopia.com/support/hardware/firmware/updates.html?224xw

Try browsing to http://192.168.1.254, which is the default address of the router from the factory. If it's been changed you'll have to find the address of your computers 'default gateway' and use that instead.

Username is 'admin' and the default password is the serial number printed on the router itself.

Once into the router, you should be able to find the firewall settings and adjust them as necessary.

Good luck.

If you have a working Windows wireless machine, you can extract the key from the Windows machine and use it on your other devices.
Download this: http://download.cnet.com/WirelessKeyView/3000-2092_4-10614187.html
and then run it.
You can learn the WEP or WPA key in use which you can then use on other devices.
If there are no other working wireless devices, you will need to log on to your access point and reset the password there. The instructions for that depend on your access point.

XBOX

You Will Have to Disable the Firewall In Your modem / Router

And IF it is a router then Open The Ports

• TCP 80
• UDP 88
• UDP 3074
• TCP 3074
• UDP 53
• TCP 53

And Also Make sure that UPnP is Enabled



========================================================

PS3

You will have to open the following ports in your modem /router
Make sure the firewall is disabled in the Modem /Router
Make sure that UPnP is Enabled

Playstation Network Required Ports

TCP 80
TCP 443
TCP 5223
UDP 3478
UDP 3479
UDP 3658

Playstation Online Game Ports

Call of Duty 3:

UDP 3074
TCP 3074

MotorStorm

UDP 3659
UDP 3660

You can use http://whatsmyip.org/ports/ to test if the ports are open.

XBOX

You Will Have to Disable the Firewall In Your modem / Router

And IF it is a router then Open The Ports

• TCP 80
• UDP 88
• UDP 3074
• TCP 3074
• UDP 53
• TCP 53

And Also Make sure that UPnP is Enabled