20 Most Recent Netopia 2247NWG-VGx Wireless Router (2247NWGVGX) - Page 6 Questions & Answers

you need to enter the static ip address of your ps3 to the router's page where you forwarded the port numbers. click here for the illustration

try to open these ports as well for gta4

UDP ports: 6672, 28900
TCP ports: 8000-8001, 27900, 28900

if you're still getting the same problem, set your router to dmz

hope this'll help you

ciao!

access your router's setup page and try to lower down your mtu. if this won't fix your concern. try to open the ports being used by the psp so that your router will allow the connection properly.

hope this'll help you and just ask me if you have other concern

ciao!

If your talking about the password for the router user interface that is not working that resetting it again using a pen or a paper clip just press and hold the reset button for 30 seconds then that should bring your router to its default settings with the default username and password.

Hi there!

I believe the WLAN key can be found at your router's set-up page or web ui. Do you know how to access it? If Not, then try to access this link and hopefully this will help you to find it..

http://www.netopia.com/support/hardware/technotes/NQG_112.html

Firstly... avoid showing your SSID (eircom-123456789) here, as the WEP key can be reverse engineered from the SSID.

To change your SSID, connect your router to your PC with an ethernet cable, go to your web browser (Intenet Explorer, Forefox, etc) and type 192.168.1.254, and press return.

This will open the control panel for the router.
Select 'EXPERT MODE' from the menu on the right, and accept the warning prompt. Then click on 'CONNECTION' and the 'WIRELESS' on the menu on the right.

In the main window you can then change the SSID for your network.

You can also change some of the other options in this window such as enabling closed mode, change security protocol, password, etc.

Have you tried http://portforward.com/ i've had alot of problems with this router fixed my xboxlive issues with portfoward but am having problems with my blueface voip

make sure you are not using internet connection sharing on your laptop. it will cause problems with the router and will keep the other laptop from connecting because of a dhcp conflict. let me know if that doesnt help. also make sure the other laptops are not using ICS either.

Honestly, no idea. If you don't have a manual with the MODEL you can try to look for the proper one, I got some links, maybe one is yours: http://www.netwood.net/support/manuals/Netopia-3347W-ENT_qsg.pdf http://www.netwood.net/support/manuals/Netopia-2247-62-User-Guide-US-EN.pdf http://videos.cctvcamerapros.com/pdf/netopia-router/Netopia-Router-Manual.pdf There are more.... Now, take note that WPS is too easy to hack. Read some about this issue: How to Hack Wi Fi Breaking WPS PIN to Get the Password with Bully And read more about theme...

1. Click the Expert Mode link near the left of the page. (it is not listed in the manual) 2.Click the Yes, enter expert mode button near the centre of the page. 3. The menu on the left should change. In this new menu, click Configure. 4. You should now see a new menu. In this new menu, click NAT. 5. Click the Define Custom Service button near the center of the page. 6.Put a dot into the Port Forwarding: Range of Ports radio button. 7. Click the Next button. Then set up the ports you want to forward. One Example s here O Port Forwarding the Netopia 3347W Router for Xbox One

Typically a label on the router will display the MAC

It Needs A Driver--If There Is None For Your Operating System, May Be Obsolete.

Hi You can fix this problem by entering 192.168.1.1 or your routers ip.then you can accsess your routers software and in the WLAN section you can change the password or reset. try looking under every section until you find the correct area which you can do things to the WLAN setting. Hope this worked :)

The password (a string of 26 letters and numbers) is usually situated on a sticker on the back of the box.

It all depends on the brand of your router, but mainly is to jump into the GUI with your admin password, look for DHCP options, static DHCP and save the MAC Address of the host with the desired IP.

Try this GENERAL ROUTERS RESETING

If you are a new user Create a New Account. then search your driver

SO YOU MUST KNOW THE PASSWORD OR NO?

MAKE AN ACCOUNT HERE ARRIS THEN LOOK FOR THE FIRMWARE.