Frigidaire ATF6000ES Front Load Washer - Answered Questions & Fixed issues
My frigdairr Frigidaire GSTF1670AS0 will not
it could be the problem but the first thing i would look at is the drain pump and check for anything that may be obstructing it from turning this will cause the washer not to run properly
5/27/2023 6:08:20 PM •
Frigidaire...
•
Answered
on May 27, 2023
•
151 views
Lock switchgear
You have to remove the rubber boot. It is very easy, just pull it off with your fingers. The spring is easy to strech most of the way around by hand, finish with a channel lock etc.
1/3/2023 6:33:00 AM •
Frigidaire...
•
Answered
on Jan 03, 2023
•
102 views
How do I go to clean cycle-Frigidaire affinity ATF6000fs
I was doing a search for infor on how to clean my affinity front load washer, and came across this infor and this did not work for me either, but when I turned my dial to rinse and spin then hit clean the clean option appeared.
2/14/2024 8:04:34 PM •
Frigidaire...
•
Answered
on Feb 14, 2024
•
35,889 views
I washed a rug and now it won't spin or drain
Hi,
Problems with a washing machine not spinning or not draining are often interrelated..
If you are having a problem with your top load washer then check out thistip...
Washing Machine does not Pump or Spin
If you are having problems with your front load washing machine then checkoutthis tip...
Front Load Washing machine not draining and or not spinning
heatman101
12/24/2020 3:24:26 AM •
Frigidaire...
•
Answered
on Dec 24, 2020
•
1,974 views
I have a Frigidaire Affinity
"pause" isn't something you can reset exactly I'm afraid. Pause means that the washer door was opened mid cycle so all you should need to do is shut the door to restart the cycle. Unfortunately if it doesn't re-start, it means that your door latch assembly has failed and isn't sensing that the door is shut. You'll need to order and replace the door latch assembly to fix the issue.
It's actually a fairly easy part to replace if you're handy. You'll need to unplug the washer and open the door to start with. Then there is a wire ring around the front lip of the rubber door gasket. Use a flat head screwdriver/needle nose pliers and pry the wire ring off. From there you can pull the gasket back out of the way. Remove the screws going into the door latch from the front and reach behind to replace the door latch assembly.
Make SURE the door strike on the door isn't broken too.
that's only a 6$ or so item.
Here's a site for parts and a video on how to replace it.
https://www.repairclinic.com/PartDetail/Door-Switch/131763256/4547033?modelNumber=ATF6000FS1
Hope this helps you.
2/17/2018 6:36:58 PM •
Frigidaire...
•
Answered
on Feb 17, 2018
•
256 views
Will not complete the final
there seems to be a problem in the water pump as its not draining properly check that there's not a button or other debris in the system first eric
12/29/2017 9:49:22 PM •
Frigidaire...
•
Answered
on Dec 29, 2017
•
219 views
My frigidaire front load washer stopped working
It sounds like the pump has stopped and may have sucked a sock or rag into it. May need to pull the washer out, remove the back. Unplug the washer and see if you can manually turn the pump/motor belt. It could also be the motor but I would check to see if they turn. If not, remove the belt and manually try to turn each and see if they turn.
11/20/2017 3:33:04 AM •
Frigidaire...
•
Answered
on Nov 20, 2017
•
182 views
I have a Frigidaire front
the most common cause is worn out brushes in the motor, sme brands you can rplace the brushes others require a new complete motor
9/27/2017 11:44:09 PM •
Frigidaire...
•
Answered
on Sep 27, 2017
•
104 views
How to unclog drain hose/pump? my front loader
First of start by checking the rubber gasket seals around the door and making sure those are good and clean and dry. Then inspect the barrel itself. My daughter loves to leave scraps of paper in her pockets that then get stuck in my front loader. Clear any debris from the barrel. Does your machine have a small front access panel or back access to get to the filter? Most front loaders have some sort of filter on them apart from the barrel. If you can find this part, it is a common culprit. Mine is a tube shaped basket with a front access panel on this one. On the front loader before this one is was back panel accessable under the drum. when you check these have a bucket and some thing mop up with handy, towels, mop, etc. One other thing to consider is the drain hose from the machine. I have flushed mine using a garden hose in the yard and used a little bleach.
5/12/2017 5:35:03 PM •
Frigidaire...
•
Answered
on May 12, 2017
•
1,335 views
Not finding what you are looking for?