20 Most Recent Mitsubishi LT-55154 55in 1920x1080 16 9 120hz Led Lcd P/N: LT-55154 - - Page 2 Questions & Answers

Hi, How many floppy discs have you got to transfer? If only a few are involved, perhaps a friend could help. If you have a lot, it may be cheaper to consider purchasing an external USB floppy drive.

Go to www.malearebytes.org and download the free version of the scanner and run it on that machine.

can i get a service manual for mitsubishi eum-1282m crt monitor

Always get your drivers and specific software from the manufacturer of your Laptop, Notebook or Desktop. They are usually free of charge.

If you were to log on to the manufacturer's web site, usually one is able to download if available, by model number, All available Driver downloads as required.

If the driver is not available, perhaps your manufacturer does not support the OS you are installing.

This is the best way of ensuring up to date drivers for your system and they are free of charge!

I hope this helps.

Try posting to the TV category, you will get a faster response.

better to go to wikipidia and learn.. because this site will not allow me to copy paste that much of words k... dudu...

If the TV has a VGA input it should work by simply striking the function key and the crt or monitor function **** on your f keys listed in blue.

It sounds like you have been infected by a virus, or malware.
The first thing I would try is to run malwarebytes from http://www.malwarebytes.org and see what it finds. It will clean up a good bit of malware.
Hope this helps!

Set your monitor from Menu button, make it wider and longer until you get full size

Hope this help (^_^)

You can use higher current rating, it will run cooler, I suggest 4A.
http://www.12vadapters.com/

http://www.fixya.com/support/r6150077-basic_lcd_monitors_troubleshooting

Failed TV and Monitors: http://s807.photobucket.com/home/budm/allalbums http://en.wikipedia.org/wiki/Capacitor_plague

Try attaching an external monitor to the laptop & see if you could get any display on it. If this is successful, then you might have either a faulty LCD cable or screen inverter board.
The LCD cable transfers data signal from the motherboard & video card to the LCD screen. It also supplies high voltage DC power to the screen inverter board. The screen inverter board works as a power supply for the backlight lamp mounted inside the LCD screen. It converts low voltage DC power to high voltage AC power needed for the backlight lamp.

If this is a crt(Cathod Ray Tube) monitor the older they get they sometimes take a little longer to warm up and get to a display.
Just age..

the inverter or the lcd bulb may be out. inverters are cheap, bulbs are not. is the screen dark like its off or glowing black? if its dark like the bulb is off, next, look closely and see if you can make out a faint image on the dark screen, if so, it is likely the inverter.