Top 20
Gemini 1 Device Universal Television Remote Control Questions & Answers
My techwood tv will not play sound and the colour
see the charts troubleshooting and fix it. God bless you
No sound
- Check if the TV and
Amplifier (if connected) is turned on and set correctly.
- Check if the TV, DVD player
and Amplifier are connected properly.
- Make sure the TV, DVD player
and Amplifier volume are not set to Mute.
- There will be no sound
output during Reverse Play / Pause / Step / Slow
/ Search.
- If the DTS soundtrack is
enabled in the DVD Disc Menu, but you are using Stereo Analog audio, the
sound will not work. Try switching the soundtrack to Dolby 5.1 or PCM
mode in the Disc Menu.
- Disc is dirty or damaged. Clean the disc or try
another disc.
- Reset the color system of the player or the TV
set.
Try a direct connection from the DVD player to the
TV set, instead of via other components.
My techwood won't play sound and the colour is
please see the chart troubleshooting. and fix it. God bless you
No sound
- Check if the TV and
Amplifier (if connected) is turned on and set correctly.
- Check if the TV, DVD player
and Amplifier are connected properly.
- Make sure the TV, DVD player
and Amplifier volume are not set to Mute.
- There will be no sound
output during Reverse Play / Pause / Step / Slow
/ Search.
- If the DTS soundtrack is
enabled in the DVD Disc Menu, but you are using Stereo Analog audio, the
sound will not work. Try switching the soundtrack to Dolby 5.1 or PCM
mode in the Disc Menu.
I need panasonic tv code for gemini cl019
Three digit codes for Panasonic TV are:
003/ 054/ 055/ 062/ 070/ 148/ 149/ 170/ 171for four digit codes and more details, Visit this site for more details. Type in the site name
"Electro-help" either Google or Yahoo
search box [
not
in the address bar of your browser], and click search. It is an electronic equipments service help
site. All details you want are
there.
Note the position of
hyphen in between words in site name, when you type it in.
The site will appear as it is in
web; subtitled as service help to electronic home entertainement equipments.
Pull up older posts.
You can get all details.
Tuning a gemini universal remote to a toshiba dvd player
Type in the site name "Electro-help" to your search engines' search box [not in the address bar of your browser], and click search. It is an electronic equipments service help site. All details you want are there. Note the position of hyphen in between words in site name, when you type it in. The site will appear as it is in web; subtitled as Service help to electronic home entertainment equipments.
Pull up older posts. You can get all details.
You can locate it either at the bottom part of first search page, or at the top of second page. Detailed descriptions are there to help you.
Sometimes, one among the advertisements by the side and bottom of each post might help you to get details about the availability of spare parts and other components.
Need tv code numbers for gemini universal tv
Hi,
Code for your Gemini universal remoet to progrmme your magnavox TV are
080,120,130,190,270,300,0054, 0706, 0030, 1454, 1254
Thanx
What is the code to program a Phillips universal
Direct Philips Magnavox Universal Remote Code Entry PM335
1. Press and hold the Code Search button until the red
indicator stays on. Release the Code Search button.
2. Press and release the desired mode button (TV,
DVD, etc.).
The red indicator blinks, then stays lit.
3. Enter the 3 digit code from the code tables. Note:
after a valid code entry, the red indicator turns off.
For an invalid code, the red indicator flashes.
4. With your device on, press CHANNEL Up. If the
device responds, no further programming is
required. Note: If some buttons do not operate your
equipment, try one of the other codes for your
brand.
How do i get universal remote to
Press and hold CODE SEARCH button until the red indicator turns on,then releas the button. Press and reaease the desired mode button(TV,VCR,etc.)the red indicator blinks then stays on. Press and release the LEARN button,the red indicator blinks thenstays on
V+ remote
ask at http://manualfox.com/remote.htm
They will figure it out!
Not finding what you are looking for?