Innovage 69420210126 Phone - Answered Questions & Fixed issues
Works in one house but not in another
Yes these phone's are sensitive to the phone jack its plugged into as it powers the backlight and the whole phone itself. You need to check and see at the NID Network Interface device outside and check and see how much voltage you got comming in there. This is a problem too with the phone is if you have more then two phones in the house on this NID, Trust me I have this phone and it is verry sensitive and it requires poer to run the unit this is a factory issue as well they built these phones without thinking about the customers situation.
thanks
Btw, I’m available to help over the phone in case u need at
https://www.6ya.com/expert/edwy_1a56970cf1ea4620
5/21/2009 7:48:47 PM •
Innovage...
•
Answered
on May 21, 2009
•
67 views
Weird..Cound't dial out
THERE IS A BLOCKING FEATURE IN THE MANUAL ON PHONES ON THE SAME LINE ,FIND IT READ IT MAYBE THIS WILL HELP
3/23/2009 8:11:02 AM •
Innovage...
•
Answered
on Mar 23, 2009
•
100 views
Got a dialling tone but couldn't make a call
Cnavarro,
my existing phones work fine but the new phone is really weird. tested Ok at the supplier's store and perfect at my friends' houses. But once tested at any of the phone outlet in my house, after keying the first 3 numbers....PLEASE CHECK YOUR NUMBER AND DIAL AGAIN etc... the scenario telling me my phone service in my house is OK and the new phone tested OK at other locations.
????
See if you could give me some clues....thanks
3/23/2009 8:02:30 AM •
Innovage...
•
Answered
on Mar 23, 2009
•
116 views
Where is area code 416?
areacode 416 is in the following locations:
East York, ON
Etobicoke, ON
North York, ON
Scarborough, ON
Toronto, ON
York, ON
9/4/2014 6:39:04 AM •
Innovage...
•
Answered
on Sep 04, 2014
•
1,172 views
Unable to dial out
I don't know whay I did sorry, but it now works. I was going thru different functions and when I tried again it workd. I jist noticed when it dials out it makes the old fashioned rotary dialing sound after ea number selected. I'm just glad it works.
Also it is not compatible with the home phone features of my service provider like *98 to access msgs.
Thanks, I look forward to using the Christmas ringtone!\
Cathy
8/22/2008 4:41:48 AM •
Innovage...
•
Answered
on Aug 22, 2008
•
131 views
Volume control
Dear lowis
Check weather it requires an external power, if it requires then u need to supply it, else if it doesnt require an external power then it is the settings at the subscriber end, which we can not do anything unless we request or complain them. And it is not the fault with the instrument. But note that the instrument mechanism could be designed with a low amplification which means it has poor circuit.
4/25/2009 3:37:57 AM •
Innovage...
•
Answered
on Apr 25, 2009
•
236 views
Help
pookawook: I assume your paying your local company for the called ID option. If so, does the callers number appear on the display? If it appears, it can only be a software setting that's incorrect on your phone and the owners manual should work you through it. Goodluck. Jerry
2/11/2008 1:27:59 AM •
Innovage...
•
Answered
on Feb 11, 2008
•
116 views
I want to get rid of the batteries
werascal: It can be done. First look at the appliance body to see if there is a power jack. If not and your a tech type person you can do this: I assume the batteries are in series, if so their total sum equals 4.5 volts. You can direct wire your supply to the battery string ends, polarity observed correct with a supply voltage of 4.5 and bingo no need for batteries. Thanks for the question. Jerry
4/18/2008 2:47:00 AM •
Innovage...
•
Answered
on Apr 18, 2008
•
125 views
Speaker phone 12/24 hour MODE doesn't work
if its on 12 hour it will have am or pm next to the time.when you set it its on 24 hour so if its 8:00 you would set it at 20:00 hours when your done your main menu should read 8:00.
2/3/2008 6:14:11 PM •
Innovage...
•
Answered
on Feb 03, 2008
•
163 views
Touch-panel/caller ID speaker phone
My phone did the same thing. It was the spy prevevtion function. pressing (#) for over 2 seconds. turned "SPI OFF". worked OK.
4/9/2008 8:56:21 AM •
Innovage...
•
Answered
on Apr 09, 2008
•
112 views
Innovage lcd, talking caller ID phone, can't program it even with the manual
You have to Press the Set button and then when Set 1 Date appears you have to watch very carefully where the
"blinking" is happening and then use the Up or Down button to make the setting. After each number change press "Set" and the blinking will move to the next value. Continue the steps until all dates and times are set.
12/25/2007 10:02:39 PM •
Innovage...
•
Answered
on Dec 25, 2007
•
133 views
Not finding what you are looking for?