Innovage 1502084 Corded Phone - Answered Questions & Fixed issues

0helpful
2answers

Area code

I had the same problem with my phone. Tried a lot but couldnt fine the solution.
8/5/2013 5:36:21 PM • Innovage 1502084... • Answered on Aug 05, 2013 • 348 views
0helpful
1answer

I;m looking for a manual for a Innovage Phone

Here's a copy of the Innovage Phone manual http://www.scribd.com/doc/6658509/INNOVAGE-Panel-CallerID-SpeakerPhone-Manual
Hope this is the one you are looking for.
6/28/2011 3:13:35 AM • Innovage 1502084... • Answered on Jun 28, 2011 • 173 views
0helpful
1answer

I am setting up my

First i would say both units are still in good condition as you can still receive calls from them comfortably without any hassles. If you cannot dial out it is probably as a result of the area code or the dial code not being set correctly. The area code helps to determine which location the home phone is situated to enable the calls to be routed through the proper channels to enable connectivity. The dial out code basically does the same as the area code. Both of them are just like address systems to determine where and how the calls are routed. Try setting both codes and see if the calls still dont go.
Hope this solution has been helpful?
5/1/2011 11:39:26 PM • Innovage 1502084... • Answered on May 01, 2011 • 183 views
0helpful
1answer

Need Users Guide for a

Hi,
Here is the manual for the Innovage Touch Panel Phone phone.

Two links are here check it out in both link:

http://www.esnips.com/doc/55e8bf3d-eefd-4c68-bf31-f46002e12d7c/INNOVAGE-Touch-Panel,-Caller-ID-Speaker-Phone-Manual


http://www.scribd.com/doc/6658509/INNOVAGE-Panel-CallerID-SpeakerPhone-Manual


post a comment for further assistance.
Thank you for using fixya have a nice day:-)
9/4/2010 10:25:57 AM • Innovage 1502084... • Answered on Sep 04, 2010 • 830 views
0helpful
1answer

How to set the date and time of an innovage phone?

Press set then press it again. Then change the year by up and down keys, then press set. Then you can repeat to change the month, day, and time.
7/2/2010 7:55:32 PM • Innovage 1502084... • Answered on Jul 02, 2010 • 292 views
0helpful
1answer

Ican get the number but not the name on caller id....

deleted phone message
5/29/2010 1:21:34 PM • Innovage 1502084... • Answered on May 29, 2010 • 71 views
0helpful
1answer

How do i get a power cord

No need for a power cord. It uses batteries.
1/29/2010 11:50:01 PM • Innovage 1502084... • Answered on Jan 29, 2010 • 55 views
0helpful
1answer
0helpful
1answer
0helpful
2answers

Phone "calls" out random numbers.

How to tranfer call to another phone downstairs
3/19/2009 6:08:27 PM • Innovage 1502084... • Answered on Mar 19, 2009 • 146 views
0helpful
1answer

RE Talking Caller ID won't work!

I DO NOT KNOW HOW TO HOOK UP PHONE. I DONOTFINDANUMBER EMAIL ME [email protected]
11/24/2008 1:50:42 AM • Innovage 1502084... • Answered on Nov 24, 2008 • 266 views
0helpful
2answers

No manuel

I did find 2 manuals on ebay, but i fear they may be written in Spanish, and with no easy way of knowing ... i did offer the item number to another person, but upon posting it suddenly occurred to me that they would most likely be in a foreign language.

Other then that ... perhaps try contacting a dealer, who may be able to contact the manufacturer on your behalf.
7/6/2008 9:07:16 PM • Innovage 1502084... • Answered on Jul 06, 2008 • 95 views
0helpful
1answer

Instruction sheet

I am new to this so some how my question got sent on the wrong product. It was for the corded Innovage Talking Caller ID LCD Touch-Panel Phone. Although it shows up correctly on the website.
6/21/2008 6:20:55 PM • Innovage 1502084... • Answered on Jun 21, 2008 • 162 views
0helpful
1answer

Phone

The ringer switch is on the back of the base next to the phone line connection that plugs in to the wall.
To set the clock, time and talking ID feature press the set button and then the up and or down button to the right of the keypad for your selection (above the hands free button)
8/3/2008 2:32:04 PM • Innovage 1502084... • Answered on Aug 03, 2008 • 103 views
0helpful
1answer

Hum

Locate phone away from devices which may interfere, basically anything with a transformer. Dont use long extension cords to connect phone to a wall jack that is far away. Plug ac power adaptor into spike-strip line filter like an isobar. Try another extension cord and/or a different location to see if you can isolate the cause of interference. Interference will get in 1 of 2 ways, through the phone line, or through the power supply.
5/17/2008 8:39:51 AM • Innovage 1502084... • Answered on May 17, 2008 • 151 views
0helpful
1answer

Customer Service

1-949-609-2000
address is
16511 Pauling
Foothill Ranch, CA 92610

I called them however, and was told they make the stuff , and when i presented my problem i kept getting transferred to someone that doesn't answer the phone. I have read and heard so many complaints about their products, i am calling the better business bureau. I have left many many many messages and no one returns my call from them. I think they are a cheap rip off company
3/19/2008 6:26:24 PM • Innovage 1502084... • Answered on Mar 19, 2008 • 117 views
0helpful
1answer

LCD not on when phone in cradle

are the batteries in it good? I Just set one of these up, and that should help.
3/3/2008 8:17:35 PM • Innovage 1502084... • Answered on Mar 03, 2008 • 80 views
0helpful
1answer

No lcd display-cannot set up phone

try replacing the batteries in the base
1/30/2008 12:10:12 AM • Innovage 1502084... • Answered on Jan 30, 2008 • 126 views
0helpful
1answer

Users manual

Hi i think i may have found what you are looking for on ebay, try this link or search out on ebay.


The original page was in another language which i translated into english and found what i believe you are looking for.
Item number: 280183495269
2 User Manuals for Innovage Talking Caller ID LCD Phone
http://translate.google.com/translate?hl=en&u=http%3A%2F%2Fcgi.ebay.es%2F2-User-Manuals-for-Innovage-Talking-Caller-ID-LCD-Phone_W0QQitemZ280183495269QQihZ018QQcategoryZ41374QQcmdZViewItem
1/20/2008 1:15:42 AM • Innovage 1502084... • Answered on Jan 20, 2008 • 363 views
0helpful
1answer

Private Call

Hi,just hold down the # key for 2 seconds your display will read on or off then select up for the one you want
12/25/2007 11:06:40 AM • Innovage 1502084... • Answered on Dec 25, 2007 • 113 views
Not finding what you are looking for?
Innovage 1502084 Corded Phone Logo

45 questions posted

Ask a Question

Usually answered in minutes!

Top Innovage Lands Phones Experts

Cindy Wells

Level 3 Expert

6688 Answers

Grand Canyon Tech
Grand Canyon Tech

Level 3 Expert

3867 Answers

k24674

Level 3 Expert

8093 Answers

Are you an Innovage Lands Phone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...