speaker mounting is key to a good sound, make sure your speakers are mounted well and the wiring is correct, if you get the speaker wiring wrong it will loose all Bass.
Press SOURCE and hold until unit the turns off. Press MULTI-CONTROL and hold until Language select appears in the display. Turn MULTI-CONTROL clockwise to Clock in display. Push MULTI-CONTROL left or right to select the segment of the clock display you wish to set. (when selected, the segment will blink). Push MULTI-CONTROL up or down to set the clock. Reference pages 60 and 61 in this link to your Pioneer DEH-P6800MP. http://www.pioneerelectronics.com/pio/pe/images/portal/cit_11221/283120138DEHP6800MPOperationManual.pdf
there is no direct input on this until. although you can purchase the aux input cable from the link i have posted which will allow you to plug in rca's into the rear. after purchasing this cable, you will have to turn on the aux option in the menu. which you may want to make sure that you can do beffore you order it.
1.with the power on, hold the source button until the until turns off 2. hold the audio button until a menu is opened. (hold function if audio doesn't work) 3. scroll through until you find the aux option and turn it on. 4. turn on the radio and scroll through the sources and make sure it is there. 5. buy cable and headphone to rca cable
Setting the clock Use these instructions to set the clock.
1. Use the MULTI-CONTROL to select Clock. "Clock" appears in the display.
2. Pushing MULTI-CONTROL left or right will select one segment of the clock display. Hour -- Minute As you select segments of the clock display the segment selected will blink.
3. Push MULTI-CONTROL up or down the set the clock. Pushing MULTI-CONTROL up will increase the selected hour or minute. Pushing MULTI-CONTROL down will decrease the selected hour or minute.
FYI: The "MULTI-CONTROL" button is the center of the volume knob.
red -Acc power yellow -12 memory power black -ground blue -amplifier remote blue/white -power antenna
SPEAKERS white left front + white/black left front - grey right front + grey/black right front - green left rear + green/black left rear purple right rear + purple/black right rear -
First you would need to purchase an aftermarket harness for the car the part number you need is a 70-8590 which is priced at $15.00 you can order it through me M&M Car Audio email address [email protected]. once you get the harness you plug that into the vehicle and wire that harness to your stereo harness color for color. After that you will have to mount it in your dash board .
u gotta turn the cd player off.....then press hold the volume botton...then u will see lots of option and u will also find the option to turn on the the aux and off...so u turn on the aux on...and will see it when u trun on the cd player ...