20 Most Recent Technics SA-AX540 Receiver - Page 5 Questions & Answers


Hello Johnny, for what you comment, the noise Leo produces the Rec-Play key inside your RS-M7
Take out the lid and you'll find on the main plate, a long piece of metal, that on the Rec-Play key
Use some contact cleaner or a couple of drops of DW-40 and apply them by one of the ends of the key,
With the equipment off, put a cassette and press the keys Rec and Play, then Stop and repeat the sequence several times, you will see that the key moves a slide, where you put the cleaner
Then connect again, turn on Play and it should work fine
If not, consult a specialized technical service
I hope I can solve the problem
Greetings Franco Dosil

Hola Johnny, por lo que comentas, el ruido leo produce la llave Rec-Play dentro de tu RS-M7
S?cale la tapa y vas a encontrar en la placa principal, una pieza met?lica larga, esa en la llave Rec-Play
Utiliza alg?n limpiador de contactos o un par de gotas de DW-40 y aplicarlas por alguno de los extremos de la llave,
Con el equipo apagado, pon un cassette y presiona las teclas Rec y Play, luego Stop y repites la secuencia varias veces, veras que en la llave se desplaza una corredera, donde haz puesto el limpiador
Luego conecta nuevamente , prende pon Play y deber?a funcionar bien
Sino es as?,consulta un servicio t?cnico especializado
Espero pueda resolver el problema
Saludos Franco Dosil

Technics Audio... | Answered on May 23, 2019


Hello Irena, check that the power cable is properly placed on the back of your Technics and also make sure that it is properly placed on the side of the power outlet, controls the outlet, works well, connecting a lamp, if it's OK, use it for the CD player
if it keeps failing you, there you would have, a problem inside the device
I suggest you look for a specialized technical service
Greetings Franco Dosil

Hola Irena, controla que el cable de corriente, se encuentre bien colocado el la parte posterior de tu Technics y tambi?n aseg?rate que se encuentre bien colocado del lado del toma corriente de energ?a, controla que el toma corriente, funcione bien, conect?ndole una lampara, si anda bien, ?salo para el reproductor de CD
si te sigue fallando, ah? tendr?as, un problema dentro del aparato
Te sugiero que busques un servicio t?cnico especializado
Saludos Franco Dosil

Technics Audio... | Answered on May 13, 2019


Yes use correct cables which will be RCA phono plugs red and white. Easy to set up.

Technics Audio... | Answered on May 02, 2019


The fan assembly can be purchased from tritronicsinc,com (use the guest account) for $24.31 using part number SYE1128-4


Dan

Technics Audio... | Answered on Apr 05, 2019


if you open the panel look around for some blown fuses. be sure to unplug the receiver before and let it sit because there are two capacitors in there that hold a lethal charge of electricity. it could be a fuse but most likely its dead. probably a transformer or amp failure.

Technics Audio... | Answered on Apr 04, 2019


Sounds like the gear that rotates the cd tray it stripped. Another possibility it that the lithium grease is drying which with make it stick. You can fix it that’s the problem, unplug it, take the cover off and use q tips to wipe off the dry grease and using q tips put some new lithium grease on the gears. Very lightly and don’t get cotton stuck in there

Technics Audio... | Answered on Mar 24, 2019


WELL SEARCH GOOGLE OR AMAZON. WE DO NOT DO IT FOR YOU

Technics Audio... | Answered on Feb 23, 2019


Please check your headshell cartridge and the cables if you can,also try removing the headshell clean the pins.

Technics Audio... | Answered on Feb 09, 2019


Technics SE CA1080 Service Manual

there is a chip called an operational amplifier under a heat sink on the pcb,that fails when it get top volumed for two long theres regulators with heatsinks.
it is listed as,

Technics SE -CA1080 amplifier F61 fault,

Technics Audio... | Answered on Jan 31, 2019


Sorry to disagree but obviously everything has not been checked or the faulty internal component(s) or break(s) in the circuitry would have been discovered and replaced or repaired...

Technics Audio... | Answered on Jan 27, 2019


If your receiver has a subwoofer output, then it is simple. run an RCA cable from the subwoofer out on the receiver to the input on the powered subwoofer. If the subwoofer out is only a single plug then you can use a Y adapter. But, most powered subwoofers will work with only one side plugged in. Try that and if it's not working right.. then get the Y adapter.

Technics Audio... | Answered on Jan 20, 2019

Not finding what you are looking for?
Technics SA-AX540 Receiver Logo

53 questions posted

Ask a Question

Usually answered in minutes!

Top Technics Audio Players & Recorders Experts

 Grubhead
Grubhead

Level 3 Expert

5699 Answers

The Knight
The Knight

Level 3 Expert

76143 Answers

Marvin
Marvin

Level 3 Expert

85206 Answers

Are you a Technics Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Technics Audio Players & Recorders

  • Technics Audio Players & Recorders

Most Popular Question

technics sa ax540 surround sound feature

  • Audio Players & Recorders
Loading...