20 Most Recent
Xante Ilumina Digital Color Press Printer - Page 7 Questions & Answers
Xante Illumina runs very slow when printing on
you need to check your settings, you may need to fool the machine..
on the webpage, or the front panel, select material type as plain.
set the weight setting as auto.
in the driver, make sure the setting is set to "printer Setting"
also in the driver check the selection for "black" instead of "colour"
hope this helps..
Toner disappears!
ok, this issue is not toner related actually. the toner bottles you have removed, I am sure still feel the weight of a nearly full one.
The issue, is most likely, the Image Drum, the toner volume, is actually measured by toner flow resistance by a device within the Image Drum, I can explain it in detail, but will take a page..
toner cartridges, only have a chip transmitter in then, that tell the machine a code when it is first installed into the machine, this resets the toner volume processor only, then the yoner flow resistance inside the Image Drum signals the processor as to how the toner is travelling..
Replace the Drum, and then enjoy using all those almost full toners...
Xante Ilumina Digital Color
it is a fact of digital print that toner scatter will apear ever so slightly. But it is noticable much more on glossy stock, as there is a high reflectivity, and no micro valleys in surface texture to loose it in..having said that...glossy stock is very difficult to print on with the Ilumina..even on label setting/ auto select for weight and Media switch on(this is the best I have been able to achieve)
Stretched Printing of Photos and graphics
ok, the issue is most likely technical, but fixable with a mouse click.
your MAC, is most likely running a pc prossessor version.
this causes mis inter[pretation of pc based files and comes into play with CS3 programs..
go into the mac hard drive, and select the appliaction (in this case In Design) go the the info page, and click on "more info"...you should see a check box for "rosetta". check this box. and then print again, problem should be solved....is so, go into all the CS3 applications and do the same..check the rosetta box...good luck...
Xante Ilumina
You need to install duplex in your windows driver printer dialogue
I have installed a new
if this is an Ilumina, try lifting out the whole yellow Image Drum. and make sure all the contacts(both ends) are clean from toner dust etc.(on the drum ends as well as the machine contacts) and re insert and re start....could be the trick..
Xante Ilumina 512 error code
this error can be caused by a new or existing PC on your network. EXAMPLE: the network settings on new DELL pc's are default set to control the network and repair any conflicts..it seems dells dont like Ilumina's, and they get this error code.
Disable the network control function in the DELL settings.
And this error will not re appear until another dell is installed.
Ghosting
No. you can not run it back through a laser printer.
the toner will melt in your customers printer.
Tried this, and reprinted using offset.
Help
try using different 12 pt stocks....they are many different kinds of paper
Xante ilumina 502 network menu lost
If the network menu is lost on your Xante Ilumina 502 printer, it may be possible to restore it by resetting the printer's network settings. Here are the general steps to reset the network settings on the Xante Ilumina 502:
- Power off the printer.
- Locate the network card on the back of the printer.
- Press and hold the small button on the network card for 10-15 seconds. This will reset the network card to its default settings.
- Power on the printer.
- Press the "Menu" button on the printer's control panel.
- Use the arrow keys to navigate to the "Network" menu.
- Select "TCP/IP" and then "DHCP" to ensure that the printer is configured to obtain an IP address automatically from your network.
- If your network requires a static IP address, you can manually configure the IP address and other network settings in the "TCP/IP" menu.
- Save your changes and exit the menu.
Not finding what you are looking for?