20 Most Recent
Konica Minolta Bizhub C 353, Bizhub Color,bizhub C 253,konica,bizhub C 450,c 550 - Page 3 Questions & Answers
TROUBLE CODE : C-2152 IN KONICA MINOLTA - Konica Minolta PRINTER
C-2152 is a trouble code that may be displayed on some Konica Minolta printers. This code generally indicates a problem with the printer's fusing unit, which is responsible for bonding the toner to the paper.
Possible causes for this error code include:
- A malfunctioning or damaged fusing unit
- Toner or toner waste accumulation on the fusing unit
- A faulty thermostat or temperature sensor in the fusing unit
- A problem with the power supply to the fusing unit
To troubleshoot and fix this error, you may need to perform the following steps:
- Check the fusing unit: Inspect the fusing unit for any visible damage, debris, or toner accumulation. If necessary, clean the unit and check for any loose or damaged components.
- Replace the fusing unit: If the fusing unit appears to be damaged or malfunctioning, it may need to be replaced.
- Check the power supply: Make sure the printer is properly connected to a working power outlet, and check the power cord for any damage or loose connections.
- Check the thermostat and temperature sensor: These components are responsible for regulating the temperature of the fusing unit. If they are faulty, they may cause the C-2152 error code to be displayed.
Konica c 452 error code c-f907
Main Board for the copier that receive info from the Document feeder is causing that code. Is your machine DS version or none version? Could have the incorrect document feeder for that machine, or the small printed circuit board that come with document feeder is bad. Could try a different document feeder. Might also see if you can have tech come and re-flash the copiers firmware specially the document feeder and or the MFB Board (Multi Function board) is bad.
Konica Minolta bizhub c454e Error Code C-3725? Help please
1. Turn OFF the main power switch.
2. Turn main power switch ON while pressing the Reset key.
3. Touch [Trouble Reset].
4. Check to make sure that [OK] is displayed and it has been reset.
5. After turning off the main power switch, turn it on again more than 10 seconds after and check if the machine starts correctly.
If the code comes back replace the fuser unit (HOT PART) Do not continue to reset. Could start a fire that would ruin a perfectly good day! Once the fuser is replace may require to reset the it again
How to clear error Code FC22 in Konica Minolta c203?
Code is assigned to MFB (Multi-Function board). To reset power off wait 10 seconds power on. If code returns then MFB board is bad. Might try updating firmware. Have tech do that as Konica Minolta Firmware is located on a secure website. They have to protect there OS's software.
Konica Minolta biz 600 error c-6708 plz help
exposure lamp or CCD issue. both located under the big glass. The CCD is the large black device on the right. The scanner is device on left that lights up scan a document though the Doc feeder or main glass.
try this reset
FIRST, if this code comes back. Have a technician look at it DO NOT CONTINUE TO RESET the code!!!! AS this is for the Hot Part called the destroy the lamp or CCD
1. Turn OFF the main power switch.
2. Turn main power switch ON while pressing the Utility/Counter key.
3. Touch [Trouble Reset].
4. Check to make sure that [OK] is displayed and the it has been reset.
5. After turning off the main power switch, turn it on again more than 10 seconds after and check if the machine starts correctly Btw, I’m available to help over the phone in case u need at
https://www.6ya.com/expert/normanj_7893313f0751935f
Not finding what you are looking for?