Top 20
Akai LCT2060 Television - Page 3 Questions & Answers
LCT2060 has sound but no picture.
connect your allconnectrion to television again.
Also check your power supply and earhing proper working.
Reset all settings to factory defaults.
No signal
Call Dish and ask them is there any firmware you need for your tv....they should provide it for you.
Does not come on
Recheck ALL connections-correctly,IF problem persits, UNPLUG TV.allowing it to ReSet Itself.Hopes this helps.BrtRal
My akai lct 2070 screen
Inverter
power suply
CCFL assembly
One of these boards are causing this problem, we have them in stock if you need them. the tv is programmed to shut down if all circuits are not functioning properly.
Hello, I own the Akai
the cable transition is already into the digital faze so there will be nothing extra for you to buy your tv is already setup to the digital network through your cable provider
No power to my lct 2070.
It's doubtful that the power cord is at fault; about 3/4 of all complaints regarding an inability to turn on are due to a failed main power supply; wish I had better news for you.
For a tech with a few fairly common instruments, troubleshooting this is no big problem but without some background and those couple of measurement devices, your chance of finding this problem and correcting it permanently is poor.
Akai LCT2060
This is a mean problem, and I feel for anyone who has it.
This can be caused by a bad power board, a bad main board or a lcd LCD panel.
An authorized repair shop would be able to substitute the main and power boards to find the source of the fault, but you don't have that luxury.
Unless you want to risk paying for an expensive part you don't need, I would suggest you take it to an Akai repair shop.
Input Signal Out Of Range
press F8 upon booting up
instead of choosing safe mode click ENABLE VGA
right click desktop, click properties,
click settings, set resolution to 1024 x 768
from there you will not see anymore the
Input Signal Out Of Range
Not finding what you are looking for?