20 Most Recent Akai LCT2060 Television - Page 5 Questions & Answers

run

have you tried to connect the red white and yellow av cords to another tv? if you have sound on another then its probably the tv you are trying to connect to for your son. If thats the case you could by an rf modulator which converts the red white and yellow to the coax connection in which case you'll have sound.

The backplane power supply, and or the backplane lamps are probably dead. In some models these parts are replaceable. In most of the models, the backplane lamps are an integral part of the screen unit, and cannot be replaced without changing the complete screen unit.

Call the manufacture tech support to find out where you can send the set for a proper service estimate.

Jerry G.

I have both for sale.. I have the whole tv that turns on , gets a picture for 2 seconds then turns off. I was told it needs an invertor but I dont want to bother fixing it.. Will sell you the whole TV with power supply, remote and TV for $100.
contact me at [email protected]

I just got done fixing an Akai LCT2660 that had four bad capacitors on the power board.Works perfect now.Hope this helps.Thank You very much!

Tyler

Use an rf modulator

I just got done fixing an Akai LCT2660 that had four bad capacitors on the power board.Works perfect now.Hope this helps.Thank You very much!

Tyler

I would replace the entire inverter board. Picking and choosing will cost more.

It is probably best if you seek the original adaptor and powercord. See below for the parts.

A/C Adaptor
Power Cord

may be the front switch panel is blown :(

I just got done fixing an Akai LCT2660 that had four bad capacitors on the power board.Works perfect now.Hope this helps.Thank You very much!

Tyler

I just got done fixing an Akai LCT2660 that had four bad capacitors on the power board.Works perfect now.Hope this helps.Thank You very much!

Tyler

I just got done fixing an Akai LCT2660 that had four bad capacitors on the power board.Works perfect now.Hope this helps.Thank You very much!

Tyler

I just got done fixing an Akai LCT2660 that had four bad capacitors on the power board.Works perfect now.Hope this helps.Thank You very much!

Tyler

Hello The problem here is that what it looks like is that you might have a power supply problem. I would suggest that you get a qualified TV tech to look at your system. and here is why, Your husband may be a good mechanic but he more than likely does not know about Tvs and the internal circuitry in them. Look at it this way, you have neurologists and you have cardiologists both are doctors, both are smart, but one works on the brain and the other on the heart. I think you get my point? My suggestion would be to get a TV tech to look at your system it might be as simple as a blown fuse of as complex as a overcurrent shutdown circiut.

I would try to contact AKAI or SONY to get an OEM replacement for the unit in question.

This is an indication that one of the components in the screen control sections has a thermal instability problem. This canusually be found using a product called cool mist which is a component cooling spray. This lowers the compenent temperature and allows you to see which component has the problem. Also you may want to if you are able try to use a voltmenter and a schematic to trace the problem down once you know which component is giving you the problem.

I just got done fixing an Akai LCT2660 that had four bad capacitors on the power board.Works perfect now.Hope this helps.Thank You very much!

Tyler

You can't. All devices with a remote need it for advanced functions. You need a facsimile (copy) remote. https://www.fixya.com/support/r29872378-universal_remotes_no_facsimile_remote ..

I would check the mains supply, check for interior light. No light means no power to the fridge, possible power lead or fuse.