20 Most Recent
Akai PT5598HD 55" Rear Projection HDTV-Ready Television - Page 10 Questions & Answers
Won't turn on
If you're using a DVD player or other component using the Component cable hookup, try unplugging that from the mix, unplug the power cord for the TV from the wall and wait 15 seconds and plug it back in, then power the TV back on. Mine used to do this and I gave up on the component cable option and went back to composite (RCA).
No Picture
Hear say has it that Toshiba who made alot of the internal parts for this model can offer more help than Akai.
As for the other problems... first Id try leaving the TV unplugged for a day or so. This is a great TV, picked mine up for 400 from my boss who baught it a few years back for 1400 from Sams Club. If I hear a solution I'll be sure to come back here and post it.
Akai PT5598HD 55 in. Rear Projection
Something like this Id have someone who knows there way around electronics, a qualified tech or someone you trust really well :-) Does the crackling affect the TV picture at all ? My first guess would be dust and or dampness on the audio components. Sometimes this can conduct electricity across small pc chips and reak all sorts of havoc. I had an old Tomas electric organ once, and it actually caught fire because two speaker wires were rubbing together and eventually wore thru the insulation and shorted out, but it was also making alot of crackling and static noises. Try raising and lowering the volume low to high and high to low and see if the crackling noises gets worse. Some audio amplifiers put out quite a bit of power, so I wouldnt trust leaving the TV on without a fire extinguisher handy.
No power to the television
Dont know if this will help, try leaving it unplugged over night, thaught I saw that solution in a blog somewhere a while ago.
Same tv no techs in area
That is a hard brand to get service on. Am I correct in understanding that the model number is PT5598HD? Could you look at the back and see if it list waht chassis number it is.I will try to locate some info to try to help you with your problem.
CONVERGENCE
Solution for your tv problem
http://cmpalmer.blogspot.com/2006/11/fixing-my-own-tv-part-ii.html
One last check and a quick dusting of the lenses and mirrors, then I powered it up for a "smoke test". It worked! I screwed the back on and reconnected all of my video sources and moved it back in place. I only had to do a minor on screen convergence adjustment and then it looked perfect again.
It took me about an hour and a half. The parts cost $5.99 each, expedited shipping was around $16. New soldering iron and bulb cost me about $25 and the heat sink compound was $5. So the repair cost me less than $60 (and would have been less without tools). Compared to a repair estimate of $500, I saved over $440!
Actually...it's a Akai PT5299HD
I HAVE A AKAI PT5299HD TV AND WHEN I PUT ON THE AUTO FOCUS THE TV KEEPS TRYING TO FOCUS ENDLESSLY BUT DOES'NT FOCUS. IS THERE A WAY TO MANUALLY FOCUS THIS TV-MY WRITING ON THE SCREEN IS BLURRY?
Akai 5598hdi convengence
Hello, I would take it to a TV repair place, they will charge around $50 and let you know what the problem is with it. this is your cheapest way out, it you want to keep it. If you chose to take it please give me a fixya rateing. Thanks, Farren
Auto Focus not working.
I think your having convergance problems.
http://home.earthlink.net/~oleg.filippov/ConvergenceFix.htm
· http://cmpalmer.blogspot.com/2006/11/fixing-my-own-tv-part-ii.html
Describe your Akai PT5598HD 55 in.
looks like you have a convergance problem akai is made from samsung
· http://home.earthlink.net/~oleg.filippov/ConvergenceFix.htm
· http://cmpalmer.blogspot.com/2006/11/fixing-my-own-tv-part-ii.html
Interlaced comes in fuzzy & with lines
you need to check if the dvd or games are doing the same thing on different inputs. if they have the same problems you might be looking at the single board or the focus block.
Akai convergance
were you having convergence problems to start with is that how you found out that it would only move side to side?
i suspect having bad connections on the convergence amp ic or bad ic's
Convergence problem
Part # STK392-040 X 2 Do not use generic-they won't hold up.
I use Panasonic brand with no recalls------wholesale cost about
30.00 each. Always replace both at same time = more efficient.
After replacement, alignment may be needed = let me know.
Please rate this solution...................T.
AKAI PT5598HD ghost image the red is offset
Replace STK392-040 IC's with name brand only. No generics.
I use Panasonic brand with no recalls.....Let me know if you
need more help.......................T.
Please rate this solution...........thanks.
TV projects a pink/green shadow
Logically proceed one source at a time = disconnect all,
then hook-up one at a time or hook-up seperately.FYI, the
RF coax , composite and s-video inputs all share the same
circuitry, whereas component is a whole seperate video
processing circuit, with another difference between 480P and
1080 I . Sounds like you have a 1080 I problem, which might
be a little sister board..............................T.
Let me know..............Thanks.
Dead television
Get a second well-qualified diagnosis. Akai does stand behind
their product as well as any mfr , but you are out of warranty.
A skilled tech should be able to tell you on a service call " what's
up! ".................................................T.
Please rate my suggestion...............T.
The tv won't come on
Try to unplug the set overnight to see if the Microprocessorr got a glitch. Try it the next day. If that didnt work i would say then your gonna need a pro as I've said before these sets have no user servicable parts inside so its not like the good old days where you take out a bunch of tubes and check them. Todays sets are all solid state electronic componets so you really have to know your electronics before you should attempt to repair a set these days as you could get a really big shock even if its unplugged. Sorry Good Luck
Picture moved up and to the right
I know this is an old post, but it was never replied to and I just joined the site.
Does the image only show the shift when on the DVD input?
It is possible that the DVD player is the one shifting the image and not the TV.
Try another device on that input and see if it goes away.
Kenneth
AKAI PT5598HD
Your set has what is know as "convergence problem" because of the bowed lines and ghost in different colors,is really not an easy solution,the set should have 3 amplifiers(one for each color)and they need to be replaced with an exact replacement,sometimes just by replacing them the aligment should be close but soemtimes you nned to get into the service menu to do some adjustments,the amps(IC's) are mounted on heat sinks and all 3 have the same part number on its face,they normally read STK--- ---,every set uses different amps,If you are familiar with tv service you have now a place to start working but if you are not too familiar be safe and call for help from a servicer.Let Us know if you need more information.
Not finding what you are looking for?