20 Most Recent E-Machines (308714) Motherboard - Page 6 Questions & Answers

it depends if it a pc or laptop you can HBCD 15 OR HIGHER TO CLEAR THE PASSWORD. IF IT IS A CMOS PASSWORD YOU CAN TRY TO CLEAR IT BY TAKING OUT THE CMOS BATTERY AFTER YOU UNPLUG THE COMPUTER OR BY USING THE JUMPER TO CLEAR IT (SOME, BUT NOT ALL). How to Clear Your Computers CMOS to Reset BIOS Settings How to Reset Your Forgotten Windows Password the Easy Way http://www.wikihow.com/Delete-Someone's-Windows-Password

"Stumble" is not an appropiate computer term. I don't understand what do tyou mean by getting or not a picture when you stumble

Hi, Can you post any other details about the device you are using, the operating system, that sort of thing? Was there any other error message on the display? I post on behalf of HP.

you would like to order a bios, emachines might sell them.

the moon button sends it to sleep. when you do that, windows nearly always fails to restart. press and hold the power button for 15 seconds then try re starting it.

here is a website with a number for emachines assistance. it's not emachines/acer but outsourced. they don't offer recovery media for free. Welcome to Answers by Acer Answers by Gateway Powered by Sutherland Global...

Hi The pc has a POST (power on self test) default that it runs before the pc can boot. it is a hardware default setting that cannot be bypassed without connecting a keyboard or mouse to it the CMOS settings may allow you to disable the keyboard and mouse function before the pc boots if that pc has the feature f1 or delete etc to access it then go through each setup setting and see if there is a disable function to disable the keyboard or mouse etc standard ps 2 connectionSs and some are USB connections cheers

Sounds like there was a surge when you plugged in the charger, and it fried the system. Chances are the data is recoverable if you remove the hard drive and install it in a different computer, but to me it sounds like that machine is dead.

you can buy them from microsoft or any windows 7 supplier.

ac97 is the most comon one

not custom parts what you could do is take the old one to the shop and see if they have got one that will fit yours.

yes as long as they are compatable take your 512 to the shop with you and they will check to see if it will.

then its telling you your battery needs replacing

no,,just add more ram,its not wise to add more power than you need.

try driver magic its alot better

goto your control panel click on the sound icon and try and set from there.also check you have the sound driver if not it wont work. go into your device manager and see if the driver is there,

if it does not have a back up windows on your laptop you will have todo it using a disc.or try this.1 Go to start menu 2 Click on all programs 3 click on Emachine 4 click on Emachine recovery management 5 Click on restore on the bar across the top 6 click on restore to system factory default.

The beeping sound is the POST, pre-operating system test trying to tell you what is wrong. Unfortunately there is no manual available for this motherboard. The chipset has a manual, but not a list of the POST beeps. here. http://www.go-gddq.com/down/2011-08/11082014121091.pdf You can contact gateway support here. Contact Support

Need more information here explain briefly