20 Most Recent Avanti ER20AW-1 Electric Kitchen Range - Page 2 Questions & Answers

The gap between the burner and the spark tip may be obstructed. When I clean mine none of them work until they all dry completely.

Hi,

Many times a freezer and/or refrigerator do not work right because of a dirty condenser coil...there are also many other things that can go wrong.

If you are hearing a clicking or buzzing then check out the last two tips.

If your refrigerator is running but warm, then...

Check out these tips that I wrote about that... it is a great place to start trouble shooting your unit...and something that you can do rather then calling a repair person to do a simple thing for you...

Refrigerator Condenser Coil Cleaning Refrigerator Repair

Refrigerator Troubleshooting Refrigerator Compressor

Refrigerator Compressor Start Capacitor and Start Relay

Refrigerator or Freezer not Cooling or Getting Cold

heatman101

Look inside the bottom drawer on the frame, if not there look on the sides of the drawer or on the sides of the oven door.

If the breaker on a 220 line looks does not mean that it is. I recommend tripping the breakers and resetting them because one leg of the 220 can trip but the other leg can keep it in the nontriped position. Reset breaker just to be safe. There is no reset on the stove. You can check the plug to make sure that you have 220 to it also with a meter. Plugs do not go bad though.

Chances are your bake element is dead. Find replacement part and remove and install as per directions.

These models all have a 'calibrate' function built into the menu. You will have to refer to the owners manual for step by step instructions. It's fairly simple to do. This function will allow you to bring the temp. of the oven up and then set it to the actual temperature it's at inside. You will need an oven type thermometer to observe inside the oven. Set it in on a rack and watch it, then go through the calibrate steps. If you need further help, I’m available over the phone at https://www.6ya.com/expert/craig_3fa289bf857b1a3c

http://www.avantiproducts.com/index.php?page=contact you can go there but whats wrong with it

Unfortunately not for that model. I realize this is an old question but it is stuck and needs answering to get rid of it. :>D https://www.google.com/search?q=Whirlpool+Range+WBP+34500+wiring+diagram ..

It sounds like your new board is faulty or there are bad connections to and from it. Have you asked Sirius Helpdesk Support? https://www.google.com/search?q=Sirius+SU1+no+power ..