20 Most Recent
Universal Remote Control DIRECTV Universal Remote Control - Page 6 Questions & Answers
DirecTV Remote Control Code Entry
DirecTV Remote Control Code Entry
To enter a control code for your TV using your DirecTV Remote Control, follow these steps:
- Turn on the TV.
- Locate the 5-digit code for your TV. (See DirecTV Remote Control Code List, page 14.)
- Slide the MODE switch to the TV position.
- Press and hold the MUTE and SELECT keys at the same time until the green light under the TV position flashes twice, then release both keys.
- Using the number keys enter the 5-digit code for your brand of TV. If performed correctly, the green light under TV flashed twice.
- Aim the remote at your TV and press the PWR key once. Your TV should turn off. If it does not turn off, repeat steps 4 and 5, trying each code for your brand until you find the correct code.
You have programmed your DirecTV remote control for your LCD TV.
_________________________________________
DirecTV Remote Control Code List DownloadDirecTV Remote Control Manual DownloadDirecTV Remote Control Code Search
Urc 11-2082 B00
For the remote URC2082 you can set a code manually by doing the following. Make sure the appliance is on, aim the total remote at it and hold setup untill red light flashes twice, type 9 9 1 and it should flash twice again. Press power and then press channel + until appliance switches of, as soon as this happens press setup and the light will flash twice again. This will store the code and can be used on everything I've tried so far.
Very little volume, not very loud at highest
On the TV-use your finger to adjust the volume level, about midway, then use the remote to shut off the tv, then turn on tv with remote. Volume level should be better! If still not loud enough...using your finger on the tv...turn up volume & repeat remote steps.
Direct tv remote control - tv volume
PaulTulsa is actually incorrect, Directv remotes do allow this function. I had this problem too... but was able to fix it. You have to go back into the system settings menu. Depending on your receiver (I have the hr21-100) press "Menu" then scroll to "Parental, Fav's & Setup" then "Sytem Setup" then "Remote" then select "Program Remote". Scroll to "TV" then select the brand name (I also have a Samsun tv). Follow the directions to change the code of the remote and manually go through the codes they have posted. The second one worked for me. Good luck.
I have a thomson roc1404
You can find a soft copy on Diplodocs. I've done a custom search and here is the link:
User manual THOMSON ROC 1404When you click on the above link, a page will open. Look on this page at the top right corner, you'll find the download link.
Not finding what you are looking for?