20 Most Recent MTX (SLH-T7512X2-A) Car Speaker - Page 7 Questions & Answers


you need to change your remote wire to a switched 12volt source, not a constant, run it to your ignition fuse

MTX Car Audio &... | Answered on Aug 16, 2009


had a friend with same problem...paid me to look at it and well...amp was just overheated or short/loose ground.

MTX Car Audio &... | Answered on Jul 02, 2009


I hesitate to answer this question for fear that you will not like the answer even if it is the truth. I have received a bad rating from a couple of people in the past just because the right answer was not what they wanted to hear.

This is a mono sub-woofer amp, which means that it is already bridged internally. You only have one speaker output in this amp, that means that the amp circuit is bridged inside, it is not split into two channels.

To bridge any output, it requires 2 channels, otherwise there is nothing to bridge.

I have been repairing car amplifiers for over 18 years, and I promise you that there is no way to bridge a single channel amp. Bridging means to convert 2 channels into 1 channel. If all you have is one channel, then there is nothing left to bridge.

I hope this explains it for you, if you have any other questions feel free to post them here and I will answer as soon as possible.

And please do not punish me with a bad rating if you do not like the answer, it is the correct answer, and sometimes the right answer is not always what we want to hear, but it does not make it wrong.

Dave

MTX Car Audio &... | Answered on Nov 09, 2008


There are several things you can check. Do you have a multi-meter?

MTX Car Audio &... | Answered on Aug 26, 2008


connectors on the rca's are bad. need to be changed out

MTX Car Audio &... | Answered on Jul 13, 2008


i have seen the jackhammer at autobarn moss street slacks creek brisbane qld not sure if it is 12000 watts but looks massive you could also try gold coast car sound brisbane qld

MTX Car Audio &... | Answered on Jun 30, 2008


what amp are u usin?What enclosure 4 speakers do u have?Might not have enouigh voltage 4 the amp.How big are the wire for power 2 amp?what ohm are you playing ,is it compatible to the woofers.Need more info.Model and makes please,but 1st a rating.

MTX Car Audio &... | Answered on Jun 16, 2008


check you spkr wiring in put if they are cross

MTX Car Audio &... | Answered on May 26, 2008


Need more information to be of any help to you. Things like:
Make & Model of the stereo, to start.

Car Audio &... | Answered Yesterday


You may have copied the CDs in a format that your audio system can not handle. You may have to consult your manual to determine what file types it can handle, and recopy the CDs to one it will handle.

Car Audio &... | Answered Yesterday

Not finding what you are looking for?
MTX (SLH-T7512X2-A) Car Speaker Logo

4 questions posted

Ask a Question

Usually answered in minutes!

Top MTX Car Audio & Video Experts

Professor_V
Professor_V

Level 2 Expert

93 Answers

Mike Duncan
Mike Duncan

Level 2 Expert

219 Answers

Philip Armitage

Level 3 Expert

437 Answers

Are you a MTX Car Audio and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

MTX Car Audio & Video

  • MTX Car Audio & Video

Most Popular Question

subwoofer only works when weather warm

  • Car Audio & Video
Loading...