Top 20
Jamo D 4SUB Subwoofer Questions & Answers
JAMO SUB 650
hi
since it is a powered speaker, probably it just needs a sound signal which you can get from the headphone socket. please double check with someone else.
Just got a jamo A3SUB.3
check all your plus sign and minus sign that connected to the receiver , if connected wrong you will not have any bass,because it going backward. Good luck!! any quest email me
[email protected]
12/25/2007 6:12:32 PM •
Jamo D 4SUB...
•
1,349 views • 0 helpful votes
Jamo 250
hi, there must be this LINE IN socket (ur so called Hole), then on the onkyo, there must be this sub-line out socket, plug one end of the RC socket to the sub out of onkyo , and other to the line in of the sub, its all to do wirth its appropriate inputs and outputs,let me know
Pls help my jamo 210 sub does not swich on, where do i find the fuse
The manual doesn’t show a user replaceable fuse are you plugged into a house outlet or a power strip. If power strip confirm that power is present and try another slot to plug into. https://bcc2479de3c817356f4e-1bbe459354cb22c942d9efbc3d6dacbf.ssl.cf2.rackcdn.com/product-manuals/SUB210_OM.pdf
12/22/2018 4:16:37 PM •
Jamo Audio...
•
594 views • 0 helpful votes
Service center chennai
Does any other speakers work through the channels you are putting the subwoofer through? Reason i ask is could there be a fault with the channel you are using i.e AUX? is your subwoofer connected with Aux cables or is it a speaker cable? If aux cable is there a slight break in the cable? Have you checked the subwoofer for any faulty wiring although i would may be discard that idea as if it was faulty it would lose sound altogether. But still may be have a look to cross that off your list you never know. But to me i think you have a faulty channel or Aux connection/speaker connection on your amplifier/stereo.
1/6/2014 7:32:53 AM •
Jamo Audio...
•
109 views • 0 helpful votes
Jamo sub 660 wont come on
Hi,I have the Jamo sub 660 and it won't come on,I took it to my technician,and he told me that it has a broken ic,the broblem is that he cannot replace it cause the number on it is scratched,does anyone know what the number is pls! Thanks in advance Joseph
8/25/2012 6:48:35 AM •
Jamo Audio...
•
1,118 views • 0 helpful votes
My jamo d115 speaker tweeter distorts or rattels when any serious bass kicks in, how do you stop this?w
Possible this is a distortion from the Amplifier if the speakers are not damaged. however it is important to switch the speakers to confirm if the fault is relative to the particular channel in which case the amplifier is faulty. If not the speaker can be the culprit. All what is needed is to reduce the BASS level a bit lower when the volume is increased so as to allow the cross over to work. Also if teh cross- over network is faulty within the speaker the bass can vibrate on the tweeter.
12/1/2011 11:57:29 AM •
Jamo Audio...
•
635 views • 0 helpful votes
Not finding what you are looking for?