20 Most Recent Hisense TC24FS2H TV - Page 2 Questions & Answers

i need to reset the sound system on my hisense TC2691dm

If its a horizontal line in the middle of the screen do not switch on the TV till you fix it. It means you have lost the vertical amplifier IC ( chip ). If you continue to turn on the TV the phosphor in area where the line is coming will get permanently burnt and do not look at the screen it can cause retina ( eye ) damage.
Take professional help to replace the chip.

i know this may sound silly but check the batteries. now if you allready changed them and your still having the same problem check the ir signal on the remote. now all you have to do is take any camera( camera phones work just as good) hold it to the ir sender on the remote press any button on the remote and look through the view finder on the camera. you should now see a light go off on the remote through the camera. if you dont see a light then you have yourself a broken remote. if you do then its possible its the tv ir reciever. and may need to be serviced. but hoping its the remote you can always get a replacment remote for cheep.

Hello, it sounds like you have a short in the power supply, this is very common and shouldnt be too expensive to repair. Get a few quotes and pick the best. Approximately $150- $250 depending on what the fault is. By the way, its not usually the screen. If they tell you it is, get a second and third opinion. I hope I have helped.

Hi, tahnk you for visit fixya. Try this: ( two step)
1.--Unpluged power cord, push pwr button ( hold), connect the plug to AC line and wait for power up, release power button.
2.-- connect power cord, press power button, hold for 15 seconds, release power button.
Let me know if this work ok?. Any questions, I will be here. Thank you

it due to EEPROM IC fault the iC is 8 pin and mark as 24CXX here XX -is 02 ,08 or 16 like that
just replace new one and see the error cord some time you need programmed EEPROM to resolve the problem

well if you still have the manuel for the dvd player the remote codes could be in there. if not you can always call sony tech support and see if they have the code on hand.

Hi

In this case you have defective speakers or loose contact to the speaker wire or spider wire this booth need to replace.

Thanks!

Use the "auto search" method to program the remote and it found a code on its own and get your tv unlocked. Try using 0478 code

yes i would try ebay first ?

Here is a link to remote manual:

http://remotes.com/remotes/documents/Hisense/TC24FS2H.pdf

These are all the codes. It is better to buy a remote specially made for that model. Read this https://www.fixya.com/support/r29872378-universal_remotes_no_facsimile_remote

Hisense TV universal remote control codes (3, 4 and 5 digit)

eliztech.com https://www.eliztech.com > remotes > codelists > hisense-... Universal remote codes for Hisense TV sets - 3 digit, 4 digit and 5 digit codes. ..

https://www.google.com/search?q=hisense+43a4k+display+time+setting ..

Set-up (Programming) procedure is too much to type in here, and is not practical and it will differ brand-to-brand remote controls. If you wish to get more; check the sites linked here. The site has set-up code list & set-up procedure to many popular brand remote controls. The site has general set-up codes to check with TVs and other devices are given, in the order of the 'device's brand name list' in alphabetical order. Set-up code list to many brand remote controls also is given. Pull up older posts. Search the sites by type in the brand name to your device in its search box at the top right part of the display window. It will help you to find the document easily. http://homenol.blogspot.com/ http://remotesearch.blogspot.com/ http://electronicshelponline.blogspot.com/ http://electrohelponline.blogspot.com/ Programming Notes • If your device does not respond to the remote after trying all codes listed or your brand is not listed in the code list, use the Auto Code Search method to program your remote. • Sometimes the first code that "works" with your device may operate only a few functions of your device. There may be another code in the code list that performs more functions. Try other codes from the code list for more functionality. This is a trial and error procedure; and quiet time consuming. You might have to check different codes said for your device. Search the site by type in the "brand name" to your device; to which you want set-up codes; in the "Search box at the top right of the display window" to get gathered related posts.

Hisense are a budget set, cheap components and are usually not worth fixing when they fail. Some ideas here https://www.google.com/search?q=Hisense+TV+come+back+on+it%27s+just+power+up+and+then+it+goes+through+a+loop ..

Question edited for clarity. You say you typed 'http', but did you type 'http://'? Your Enter button is the OK Button in the centre of the 4 Arrows on the remote. https://remotes-world.com/products/hisense-tv-49-n-2170-pw The best way is to use a Bluetooth keyboard if the set uses Bluetooth connectivity. ..